Mercedes-Benz B-Class Electric Drive 2014 Operator's Manual page 276

Fuses
274
The transmission automatically shifts to posi-
tion P when you open the driver's or front-
passenger door or when you remove the
SmartKey from the ignition lock. In order to
ensure that the transmission stays in position
N when towing the vehicle, you must observe
the following points:
Make sure that the vehicle is stationary.
X
Turn the SmartKey to position 2 in the igni-
X
tion lock.
Depress and hold the brake pedal.
X
Shift the transmission to position N.
X
Release the brake pedal.
X
Apply the electric parking brake.
X
Position the front wheels in the straight-
X
ahead position.
Switch on the hazard warning lamps
X
( page 100).
Y
Turn the SmartKey in the ignition lock to
X
position 0 and leave the SmartKey in the
ignition lock.
Transporting the vehicle
The towing eye can be used to pull the vehicle
onto a trailer or transporter for transporting
purposes.
Turn the SmartKey to position 2 in the igni-
X
tion lock.
When the vehicle is stationary, depress the
X
brake pedal and keep it depressed.
Shift the transmission to position N.
X
As soon as the vehicle has been loaded:
Prevent the vehicle from rolling away by
X
applying the electric parking brake.
Shift the transmission to position P.
X
Turn the SmartKey in the ignition lock to
X
position 0 and remove the SmartKey from
the ignition lock.
Secure the vehicle.
X
! You may only secure the vehicle by the
wheels, not by parts of the vehicle such as
axle or steering components. Otherwise,
the vehicle could be damaged.
Fuses
Important safety notes
G WARNING
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric cables could be overloaded.
This could result in a fire. There is a risk of an
accident and injury.
Always replace faulty fuses with the specified
new fuses having the correct amperage.
! Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Only use fuses marked with an
"S". Otherwise, components or systems
could be damaged.
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the compo-
nents on the circuit and their functions stop
operating.
Blown fuses must be replaced with fuses of
the same rating, which you can recognize by
the color and value. The fuse ratings are listed
in the fuse allocation chart.
If a newly inserted fuse also blows, have the
cause traced and rectified at a qualified spe-
cialist workshop, e.g. an authorized
Mercedes-Benz Center.
Before changing a fuse
Secure the vehicle against rolling away
X
( page 144).
Y
Switch off all electrical consumers.
X
Turn the SmartKey to position 0 in the igni-
X
tion lock and remove it (
indicator lamps in the instrument cluster
must be off.
page 127). All
Y