Mercedes-Benz B-Class Electric Drive 2014 Operator's Manual page 143

Vehicle charge socket cover
=
Fastener
?
Vehicle socket
A
Warning sticker
B
Set the DIRECT SELECT lever to position P.
X
Switch the ignition off.
X
Press the charge socket flap in the direc-
X
tion of arrow :.
The charge socket flap swings up.
Slide fastener ? to the right.
X
Vehicle charge socket cover = is open.
Insert the charging cable connector into
X
vehicle socket A to the stop.
i
The vehicle must not be moved while the
charging cable is connected or during
charging.
i
Depending on the temperature, the
engine cooling system and battery cooling
system may audibly switch on when the
charging cable is connected or during the
charging process.
Removing the charging cable
When the charge level display reaches 100%,
the battery is fully charged (
! Make sure the charging cable has been
disconnected from the vehicle socket
before starting a journey. The vehicle or
charging cable may otherwise be damaged
when you drive off.
Charging the high-voltage battery
When the battery is charged:
X
X
X
page 174).
Y
Press and hold button C on the charging
cable connector and remove the charging
cable from vehicle socket A.
Close vehicle socket cover =.
Close the charge socket flap.
141
Z