Mercedes-Benz B-Class Electric Drive 2014 Operator's Manual page 189

Example: changing the charge current
Setting the maximum charge current
:
i
This menu is not available in some coun-
tries. In this case, the maximum charge
current for the power socket is limited to a
fixed level, depending on the country con-
cerned.
Press the = or ; button on the steer-
X
ing wheel to select the
Use 9 or : to select the
X
submenu.
Press the 9 or : button to select
X
Max. Charge Current Max. Charge Current.
Press a to confirm.
X
Press 9 or : in the submenu to
X
select desired maximum charge cur-
rent :.
Press the a button on the multifunction
X
steering wheel to confirm.
The high-voltage battery is charged with
the selected maximum charge current.
Instrument cluster
Selecting the display unit
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster Instrument Cluster
Press a to confirm.
X
Sett. Sett. menu.
E-CELL E-CELL
Sett Sett menu.
submenu.
Menus and submenus
Press the : or 9 button to select the
X
Display Unit Speed-/Odometer Display Unit Speed-/Odometer
tion.
You will see the selected setting:
miles. miles
Press the a button to save the setting.
X
The selected unit of measurement for dis-
tance applies to:
the digital speedometer in the
R
the odometer and the trip odometer
R
the trip computer
R
the current consumption and the range
R
navigation instructions in the
R
cruise control
R
ASSYST PLUS service interval display
R
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster Instrument Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Permanent Display: Permanent Display:
You will see the selected setting:
Temperature Temperature or Speedometer Speedometer [km/h]
Press the a button to save the setting.
X
Lights
Switching the daytime running lamps on/
off
Canada only: daytime running lamps are
required by law. You cannot set the
Running Lights Running Lights function via the on-board
computer.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light Light submenu.
Press a to confirm.
X
func-
km km or
Trip Trip menu
Navi Navi menu
Sett. Sett. menu.
submenu.
function.
Outside Outside
[km/h].
Daytime Daytime
Sett Sett menu.
Z
187