Mercedes-Benz B-Class Electric Drive 2014 Operator's Manual page 247

Table of Contents

Advertisement

include text message, e-mail or an automated
call.
The data you receive contains the following
information:
the location where the speed limit was
R
exceeded
the time at which the speed limit was
R
exceeded
the selected speed limit which was excee-
R
ded
Geo fencing
Geo fencing allows you to select areas which
the vehicle should not enter or leave. You will
be informed if the vehicle crosses the boun-
daries of the selected areas. You can select
the way in which you receive this information
beforehand. Possible options include text
message, e-mail or an automated call.
The area can be determined as either a circle
or a polygon with a maximum of ten corners.
You can specify up to ten areas simultane-
ously. Different settings are possible for each
area.
Alternatively, you can trigger an MB Info call
and inform the customer service representa-
tive that you wish to activate geo fencing.
Currently inactive areas can be activated by
text message.
Triggering the vehicle alarm
With this function, you can trigger the vehi-
cle's panic alarm via text message. An alarm
sounds and the exterior lighting flashes.
Depending on the setting, the panic alarm
lasts 5 or 10 seconds. Afterwards, the alarm
switches off.
Garage door opener
Important safety notes
G
WARNING
When you operate or program the garage door
with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is a risk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
Programming
Programming buttons
Pay attention to the "Important safety notes"
(
page 245).
Y
Integrated garage door opener in the rear-view mir-
ror
Garage door remote control A is not part of
the integrated garage door opener.
Before programing for the first time, clear
X
the integrated garage door opener memory
(
page 248).
Y
Turn the SmartKey to position 2 in the igni-
X
tion lock.
Press and hold button ;, = or ? of the
X
integrated garage door opener.
After a short time, indicator lamp : lights
up yellow.
i
Indicator lamp : lights up yellow as soon
as button ;, = or ? is programmed for
Features
245
Z

Advertisement

Table of Contents
loading

Table of Contents