Mercedes-Benz B-Class Electric Drive 2014 Operator's Manual page 243

necting necting Call Call message. The audio system
is muted.
If a connection can be made, the
nected nected message appears in the multifunction
display.
If a mobile phone network and GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example:
current location of the vehicle
R
vehicle identification number
R
i
The audio system or COMAND display
indicates that a call is active. During the
call, you can change to the navigation menu
by pressing the NAVI button on COMAND,
for example.
Voice output is not available.
A voice connection is established between
the Mercedes-Benz Customer Assistance
Center and the vehicle occupants.
You receive information about operating your
vehicle, about the nearest authorized
Mercedes-Benz Center and about other prod-
ucts and services from Mercedes-Benz.
i
The system has not been able to initiate
an MB Info call, if:
the indicator lamp in MB Info call but-
R
ton : is flashing continuously.
no voice connection to the Mercedes-
R
Benz Customer Assistance Center was
established.
This can occur if the relevant mobile phone
network is not available, for example.
The Call Failed Call Failed message appears in the
multifunction display.
To end a call: press the ~ button on the
X
multifunction steering wheel.
or
Press the corresponding button for ending
X
a phone call on the audio system or on
COMAND.
Call priority
When service calls are active, e.g. Roadside
Call Con‐ Call Con‐
Assistance or MB Info calls, an emergency
call can still be initiated. In this case, an emer-
gency call will take priority and override all
other active calls.
The indicator lamp of the respective button
flashes until the call is ended.
An emergency call can only be terminated by
the Mercedes-Benz Customer Assistance
Center.
All other calls can be ended by pressing:
the ~ button on the multifunction steer-
R
ing wheel
the corresponding button on the audio sys-
R
tem or on COMAND for ending a telephone
call
i When a call is initiated, the audio system
is muted. The mobile phone is no longer
connected to COMAND. However, if you
want to use your mobile phone, do so only
when the vehicle is stationary and in a safe
location.
Downloading destinations in COMAND
Downloading destinations
i
The Destination Download function is
only possible when:
the relevant mobile phone network is
R
available and data transfer is possible.
the vehicle is equipped with a navigation
R
system.
Downloading destinations gives you access
to a database with over 15 million points of
interest (POIs). These can be downloaded on
the navigation system in your vehicle. If you
know the destination, the address can be
downloaded. Alternatively, you can obtain
information on the location of points of inter-
est (POIs)/important destinations in the
vicinity.
Furthermore, you can download routes with
up to 20 way points.
Features
241
Z