Maintenance; Upgrade - IME Milesight EM300 Series User Manual

www.ime.de
Note:
1) If you enable LoRa Uplink, a LoRaWAN ® uplink packet that contains the sensor status or
temperature threshold alarm will be sent to gateway after the Milesight D2D control command
packet. Otherwise, sensor status or threshold alarm will not send to LoRaWAN gateway.
®
2) If you want to enable Temperature Threshold Trigger Status: Trigger or Temperature
Threshold Trigger Status: not triggered, please enable and configure temperature threshold
feature under Threshold Settings.

3.6 Maintenance

3.6.1 Upgrade

1. Download firmware from Milesight website to your smartphone.
2. Open Toolbox App and click Browse to import firmware and upgrade the device.
Note:
1) Operation on ToolBox is not supported during an upgrade.
2) Only Android version ToolBox supports the upgrade feature.
18