Table of Contents
Advertisement
www.ime.de
3.5 Advanced Settings
3.5.1 Calibration Settings
ToolBox supports temperature and humidity calibration. Go to Device > Setting > Calibration
Settings to type the calibration value and save, the device will add the calibration value to raw
value.
3.5.2 Threshold Settings
Go to Device > Setting > Threshold Settings to enable the threshold settings and input the
threshold. EM300 series will upload the current data once instantly when the temperature
threshold is triggered. Note that when you change the temperature unit, please re-configured the
threshold.
3.5.3 Alarm Settings
Go to Device > Setting > Alarm Settings to enable the alarm settings. When EM300 detects door
status change or water leakage, it will report the alarm according to reporting interval and
reporting times setting.
13
Advertisement
Table of Contents
