Connecting A Dvd Player Or Other S-Video Device - Mitsubishi Electric LT-2220/LT-3020 Owner's Manual

Connecting a DVD Player or Other S-Video Device

Note: The TV side panel and connections shown here are for reference only and may vary by model.
�
���
�����
�
�
�
� �����
�
�
�
�
�
�
�
���� � ���
Figure 9. Connecting a DVD Player with Component Video.
See Appendix B, page 58, for component video
signal compatibility information.
For digital audio connections, see your DVD
and A/V receiver Owner' s Guides.
�
���
�����
�����
���
�
Figure 10. Connecting an S-Video Device.
18
LCD Monitor 5 8 03.indd
�
�
�
�� ���� ����� � �����
��� ���� �����
����� ���
���� �� �� �� �� ��
��� �� �������� ��� �������������
��� ������
�������
������ �����
�����
����� ������ ����� ����
�
����� ����������� ���
������ ���
����� �������
� ����������� ��
���
���������� ������� �����������
�
�������� ����
��������� �������� ����� ������� ������� ���� �������� ����
������� �� �����
���� �� ��� ��
�� ���� ����� � ����
�
��� ������� ������
����� ��� ����� �� ����� ���
� � �����
�
� �
�
�
18
DVD Player/Video Game with
Component Video
(Figure 9)
1. Connect the Component Video cables from
(YCb Cr or Y Pb Pr) VIDEO OUT on the back of
the DVD player to COMPONENT (1 or 2) on
the TV side panel. The correct connections are:
Y to Y
A.
Cb or Pb to Pb
B.
Cr or Pr to Pr
C.
Connect a set of audio cables from AUDIO OUT
2.
on the back of the DVD player to COMPONENT
AUDIO Input (1 or 2) on the TV side panel.
• The red cable connects to the R (right)channel
• The white cable connects to the L (left) channel
NOTE: Some video game systems support component
connections. Please refer to your video game
console Owner's Guide.
NOTE: If your DVD player supports progressive
scan playback, be sure to set your player
accordingly. Please refer to your DVD player's
Owner's Guide.
Other S-Video Device
(Figure 10)
1. Connect an S-Video cable from VIDEO OUT
on the device back panel to VIDEO INPUT-1 or
INPUT-2 on the TV side panel.
2. Connect a set of audio cables from AUDIO OUT
on the device back panel to AUDIO INPUT-1 or
INPUT-2 on the TV side panel.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
If your S-Video Device is mono (non-stereo), connect
only the white (left) cable.
5/8/2003, 3:02 PM