Information Viewing And Setting; Display Settings - E-Bike EKD01 Manual

II. Information viewing and setting

1. Display settings

Click " " to enter the settings menu, use "+" or "-" to
and down, select "Display
Bluetooth", "Reset Factory Settings" and "Exit", and click
"
The interface is shown in the following figure:
① Imperial and metric unit conversion
Enter the "Display Settings" menu, select "Units", click " " to enter the
settings, use "+" or "-" to move the cursor up and down after entering the
settings, select "Metric"/"Imperial", click "Back" to exit "Units", exit the main
interface through "Return" →. (The entry and exit procedures for other settings
are similar and will not be repeated).
The unit conversion is shown in the following figure.
Note: The default units are imperia
② Automatic shutdown operation
Go to the "Auto Off" menu and select "OFF", "1 minute", "2 minutes", "3 minutes",
"4 minutes", "5 minutes", "6 minutes", "7 minutes", "8 minutes", "9 minutes", "10
minutes" ("OFF" means to turn off the function, "1min-10min" means the time of
, respectively.
automatic shutdown
Note: Any operation within the auto-off time will be timed again, and no
Settings", "Information", "Language", "Theme", " Password",
l.
8/20
move the cursor up
to operate.
" "