General Operations - E-Bike EKD01 Manual

7. General Operations

B02NU-AKSM provides 4 themes and 3 languages
manual uses Theme 1 (English version) as an example.
"Press and hold the key >2.5 seconds" is replaced with "long press", "long
key <0.5 seconds" is replaced with "tap".
① On/Off
Press " to power on/off the monitor. In the shutdown state, the current of
"
the display is less than 1uA. The boot screen is shown in the following figure.
(You need to enter the password before entering the main screen, the default
password is 0000).
② Gear level selection
After entering the main display, click "+" or "-" to increase or decrease the
gear level and change the motor output power, the default gear of the
instrument is 0-5 (support customization); No power output in 0 gears
users to set up, this
for
6/20
1 is the
,