Table of Contents
Advertisement
this once.
Note: If you want to enable
password after modification
Do not change the initial password arbitrarily.
After modification, the interface will automatically jump to the original
menu .
As shown in the figure below:
③ Bluetooth unlock setting (turned off by default, needs to be turned on
manually).
Go to the Bluetooth Unlock menu, click "+" or "-" to select On/Off ("On"
means to enable it, "Off" means to disable it). If Bluetooth unlock
the mobile app is not connected, a
bind.
The result is as follows:
feature,
the password
.
Bluetooth QR code
14/20
a new
you need to enter
is enabled when
will pop up for you to
interface
Advertisement
Table of Contents
