Copying The Same Data To Multiple Cd-Rs; Copying Data Larger Than The Remaining Cd-R Capacity - Sony MCS-1 Operating Instructions Manual

Mini cd-r station
Hide thumbs Also See for MCS-1:
Table of Contents

Advertisement

Available languages

Available languages

Copying the same data to multiple CD-Rs

When you have copied some data onto a CD-R, you can copy the same data
onto another CD-R. To do this, proceed as follows after the first copy is
finished.
1
2

Copying data larger than the remaining CD-R capacity

When the size of the data to be copied from a digital still camera exceeds
the remaining capacity of the CD-R, the following indication appears in the
display window. We have used the copy of data from a digital still camera
to illustrate.
In this case, you can perform the following steps to split up the data and
copy it onto multiple CD-R.
z
You can cancel the copy by pressing the MODE button.
GB
20
Remove the copied CD-R from the MCS1 and insert the new
CD-R.
(1) Push and slide the OPEN lever to open the cover.
(2) While pressing the center of the disc, grasp the edges of the
CD-R and lift it out.
(3) Place the new CD-R inside the MCS1 and close the cover.
Continue to copy data.
The method for copying data is different, depending on the type of
media or device that is used as a source. Proceed to the appropriate
page.
Hint

Advertisement

Table of Contents
loading

Table of Contents