Copying Data To A Cd-R; Inserting The Cd-R - Sony MCS-1 Operating Instructions Manual

Notes
• You cannot use manganese batteries with the MCS1.
• For details on the remaining charge indicator, see the explanation on page 7.
Particularly in the case of Ni-Mn and NiMH batteries, voltage decreases rapidly when
charge runs low, so it is best to replace batteries early.
To remove the batteries
Turn the fastening screw to disengage the lock and then pull the battery
pack off the MCS1.

Copying Data to a CD-R

Inserting the CD-R

To copy data to a CD-R, proceed as follows.
Notes
• Be sure the MCS1 is placed on a flat surface.
• Do not let anything shake or strike the MCS1 during copying.
1
Hold down the POWER button for at least 2 seconds to turn
on the MCS1.
2
Push and slide the OPEN lever to open the cover.
3
Insert a new CD-R and close the cover.
Notes
• Insert the CD-R with the label facing upwards.
• Do not touch the recording side of the CD-R.
• Push the cover of the MCS1 down until it audibly snaps shut.
• Due to CD-R recording characteristics, the actual amount of data that can be
• Depending on the files you copy, the amount of space copied may be larger than
stored on a disc is less than the amount shown on the disc package.
the size of the files copied.
Continued on next page
GB
11