1. Manuals
  2. Brands
  3. Snell Manuals
  4. Media Converter
  5. CVR800
  6. Operator's manual

Snell CVR800 Operator's Manual

Standards converter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CVR800 Standards Converter
3Gb/s, HD & SD SDI and Composite Standards Converter with
Synchronizer, Up, Down and Cross Conversion
Operator's
Manual
© November, 2010
Snell Ltd., Southleigh Park House, Eastleigh Road, Havant, Hants, PO9 2PE, United Kingdom.
For General Enquiries contact:
Tel: +44 (0) 2392 489000
Fax: +44 (0)23 9245 1411
For Technical assistance contact: +44 (0) 118 921 4214
Fax: +44 (0) 118 921 4268
Web: http://www.snellgroup.com/support

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CVR800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Snell CVR800

Summary of Contents for Snell CVR800

  • Page 1 Synchronizer, Up, Down and Cross Conversion Operator’s Manual © November, 2010 Snell Ltd., Southleigh Park House, Eastleigh Road, Havant, Hants, PO9 2PE, United Kingdom. For General Enquiries contact: Tel: +44 (0) 2392 489000 Fax: +44 (0)23 9245 1411 For Technical assistance contact: +44 (0) 118 921 4214 Fax: +44 (0) 118 921 4268 Web: http://www.snellgroup.com/support...
  • Page 2 Advertencia Si la unidad tuviera dos tomas de alimentación, asegurarse de que ambos cables de alimentación están conectados a la misma fase. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 3 Varning! Om enheten har två huvudsakliga elförsörjningar, säkerställ att on liitettävä verkkopistorasioihin, joissa on sama vaiheistus. båda strömkablarna som är inkopplade i enheten arbetar från samma fas. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 4 Note that for equipment that is not fitted with a mains power switch, to comply with EN60950 Clauses 1.7.2 and 2.6.9, the power outlet supplying power to the unit should be close to the unit and easily accessible. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion ©...
  • Page 5 EMC Performance of Cables and Connectors Snell products are designed to meet or exceed the requirements of the appropriate European EMC standards. In order to achieve this performance in real installations it is essential to use cables and connectors with good EMC characteristics.

  • Page 6: About This Manual

    Information in this manual and software are subject to change without notice and does not represent a commitment on the part of Snell Ltd. The software described in this manual is furnished under a license agreement and may not be reproduced or copied in any manner without prior agreement with Snell Ltd. or their authorized agents.

  • Page 7: Table Of Contents

    Appendix B: Changing the Default IP Address ..................69 Appendix C: Upgrade procedure ......................72 Appendix D: Kudos+ USB/IP Gateway ....................79 Manual Revision Record...........................96 CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...

  • Page 8: Description

    In addition, the product handles embedded, AES (balanced or unbalanced) and analog audio, with a range of additional features such as Aspect Ratio Conversion (ARC) and color space conversion. The CVR800 has a DC input for redundant PSU capability and is provided in a compact half rack width housing with remote control via an Ethernet connection.

  • Page 9: Technical Profile

    CVBS, YC, 3D adaptive comb filter. Good tolerance to poor inputs. Standards PAL, NTSC, NTSC-J, PAL-M, PAL-N, input N4.4, SECAM 12 bit ADCs. Control of Comb, Pedestal, ACC, CTI and Noise reduction CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 10 2 x Stereo Analog 24 bit; THD , -91dB and +24dBu, flatness 20Hz – 20KHz ±0.05dB wrt 1KHz Audio Out CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 11 Frequency: 100Hz to 10kHz in 100Hz steps User memories Up to 16 configurations can be saved, cleared and recalled. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 12 Closed Caption CEA608 NTSC Enable (59.94Hz only) CEA708 Output line number (1080i/P & 720P); enable CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 12...
  • Page 13 (minimum) and 2 fields plus 0.4 ms (maximum). For ARC mode, there must be at minimum 4 fields of delay as the CVR800 must load at least 3 fields of data to be able to do the aspect ratio conversion with 'still mode' processing. In input-locked mode, the ARC delay could be just 4 fields. However, if the user is synchronizing the output to a chosen reference, as in Sync mode above, depending on the reference, and up to an additional 2 fields + 1ms (maximum) delay may be incurred.

  • Page 14: Installation

    Clauses 1.7.2 and 2.6.9, the power outlet supplying power to the unit should be close to the unit and easily accessible. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 15 These BNC connectors enable either: • 2 CVBS inputs (CVBS A, CVBS B) • 1 YC input CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 15...
  • Page 16 Control Connections Ethernet Connection to a Web browser can be made via the 10/100 BaseT Ethernet connection. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 17 AES In Pair 1 ‘G’ GND8 Analog In Pair 1 left ‘G’ D-Type Connector (On Unit) CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 17...
  • Page 18 Audio A Audio Control Audio B Audio Audio B Audio Ethernet Remote Ref Loop Control CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 18...

  • Page 19: Operation Via The Front Panel

    Audio In and Audio Out menus, as well as to the More menu, which provides access to additional setup functions. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 20 625i, 525i, 720P 50, 720P 59.94, 1080i 50, 1080i 59.94, 1080P 50 A, 1080P 59.94 A, 1080P 50 B, 1080P 59.94 B CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 21 CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 22 Note that when the output is not selected to be an SD standard, the CVBS or YC output will not be valid. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 23 CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 24 Back SD Output Format The available options are: • Normal 4:3 elect • 16:9 An CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 24...
  • Page 25 VANC Blank Selecting this option blanks all vertical ancillary data. Back VANC Blank Select Off CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 25...
  • Page 26 This control does not have any effect if the Custom preset is not selected. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 27 Normal: nominally flat frequency response • Sharp1, Sharp2, Sharp3: progressively more boost in the frequency band of interest. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 27...
  • Page 28 High1: recommended for slightly soft source material • High2: recommended for extremely soft source material CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 28...
  • Page 29 This control Enables or Disables pair routing for Back Pair Routing B audio input pair B. Select Enabled CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 29...
  • Page 30 This control Enables or Disables pair routing for audio input pair D. Select De-embed ch 8 Back Pair Routing D Select Enabled CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 30...
  • Page 31 Rotate the knob to adjust the audio delay -40ms to Back Audio Delay +80ms relative to the video delay. Preset CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 31...
  • Page 32 Rotate the knob to adjust the pair gain ±18dB in Preset 0.0dB 0.1dB steps. The preset value is 0dB. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 32...
  • Page 33 Preset 18.0 dBu DAC 2 outputs audio selected under the Audio B tab. The preset value is 18.0 dBu. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 34 Back Genlock Free run Output video is locked to an internal reference Select -Freerun- clock. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 34...
  • Page 35 93% of the effective picture height and Back Safe area marks width. Select CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 35...
  • Page 36 Rotate the knob to select the memory you want to Select User Memory 1 clear and then press the Select button. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 37 See “Operation via the Web interface” for more details. • • ETSI • Force • Delete CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 37...
  • Page 38 AFD are Enable blanked, or passed from the input if selected. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 39 16/9 centre • 16/9 top • >16/9 centre • 4:3 SP 14/9 • 16/9 FF CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 39...
  • Page 40 4:3 AFD 1 details. • 4/3 AFD 0 to 7 • 16:9 AFD 0 to 7 CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 40...
  • Page 41 Press Preset to return the insertion line to its default value of 19. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 42 Web Interface. See Obtaining MIB files on page 64 for more information. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 43 The range of adjustment is from lines 8 Select Line 9 to 20 and the preset value is line 9. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 44 In DHCP mode, it will display 0.0.0.0 when disconnected from the network. MAC Address This displays the unit’s MAC address. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...

  • Page 45: Operation Via The Web Interface

    Operation via the Web Interface In addition to the unit front controls, the CVR800 can also be controlled by means of a Web interface accessed via the 10/100 BaseT Ethernet connection. Connection to the Web interface can either be made directly or via a DHCP network.
  • Page 46 3. Connect to the unit by entering the given address into your web browser, preceded by “http://” if necessary. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 47 Red indicates that the browser is not currently controlling the unit, while green indicates the connection is functioning normally. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 48 This displays the current L23 output signaling type. Output VI This displays the current Video Index output signaling type. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 49 Selecting this option allows the composite source (NTSC only) to be treated as if a pedestal is present. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 50 Note that when the output is not selected to be an SD standard, the CVBS or YC output will not be valid. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 51 SD16:9AN to SD4:3 Fit to Width. VANC Blank Selecting this option blanks all vertical ancillary data. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 52 Unknown is manual: When option is selected the unit will use manual aspect conversions if the input signal type is not recognized. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 53 This control does not have any effect if the Custom preset is not selected. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 54 Sharp1: recommended for slightly soft source material • Sharp2: recommended for extremely soft source material CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 54...
  • Page 55 The control is disabled when the unit is input locked and a fixed minimum delay is set. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 56 RDD08 output line. The range of adjustment is from lines 8 to 20 and the preset value is line 9. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 57 VI data other than coded frame and AFD are blanked, otherwise, they are passed from the input if appropriate. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 58 L23 force bits: • Determines whether the L23 user bits set above are forced into the L23 output. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 59 The options on the Signalling 2 tab specify the output that will be forced if the corresponding Force option is selected on the Signalling 1 tab. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 60 8 is selected for Audio in A – Left the unit will automatically route ch 9 to Audio in A – Right. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 61 Tone Frequency Use the slider to adjust the tone frequency between 100Hz and 10kHz in 100Hz steps. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 62 In this field you can specify the value at which the timecode starts. Trigger Click Trigger to trigger a timecode event. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 63 Trap enable 1 – 4 Select the check box to enable the corresponding trap destination. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 64 Note: Included with the MIB files is a CSV file that details the available SNMP functions. Click Here CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 65 Note that the memory must have been previously stored and be in the User Memory Present list for this to have any effect. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.

  • Page 66: Appendix A: (Automated Aspect Ratio Control)

    Appendix A: (Automated Aspect Ratio Control) Recognized Input Signalling The CVR800 can be configured to respond automatically to a variety of Aspect Ratio signalling standards, controlling both the ARC conversion that is performed, and the new signalling that can be inserted at the unit’s video outputs.
  • Page 67 16/9 AFD 7 Reserved 16/9 Anamorphic Normal 16/9 16/9 AFD 12 Reserved 16/9 Anamorphic Normal 16/9 CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 67...
  • Page 68 SD 16/9 16/9 AFD 8 Coded 16/9 16/9FF Anamorphic Anamorphic Anamorphic Frame AFD 0- Coded Frame CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 68...

  • Page 69: Appendix B: Changing The Default Ip Address

    Applet control see Operation via the Web Interface on page 45. To change the default IP Address 1. Open the Initial Setup tab. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 70 3. Click on any other tab in the Control Applet. In this example the Output tab has been selected. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 71 The unit will restart. Once restarted, load up the Applet again and confirm that the desired Default Gateway has been set. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.

  • Page 72: Appendix C: Upgrade Procedure

    Screen shots used to illustrate the upgrade procedure in the appendix refer to Mach HD. If you are upgrading CVR800 or TBS800 please note that the software references will be to CVR800 or TBS800 respectively. This diagram illustrates the basic connection process: To perform an upgrade of any of the listed units, perform the following procedure.
  • Page 73 PC. Note on the lower left of the Browser, there is a link titled ‘Upgrade’. Click this link. Upgrade Link CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 74 In this example a MachHD is being upgraded. Normal practice would be to upgrade the latest version, which in this case is V3.02a. Click on the required ‘Link’. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion ©...
  • Page 75 6. You will now be given the option to save this file. Save it in a suitable folder on your local drive: 7. Now click on the ‘back to unit’ link: CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion ©...
  • Page 76 8. You will now see the following page displayed: 9. Now browse to the file you just downloaded and then hit the ‘Send upgrade’ link CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion ©...
  • Page 77 11. Once the file has uploaded to the Kudos+ unit, it will commence a self-install process. You will first see confirmation of the un-zipping process: CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion ©...
  • Page 78 13. Completion of the process is confirmed by the return of the Control Applet. The new version of code can be confirmed under the ‘Status’ tab: New Version CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.

  • Page 79: Appendix D: Kudos+ Usb/Ip Gateway

    Mach-1 The RollTop application is available free of charge from the Snell Service department. Please contact your local Snell Sales office for more information about the other RollCall applications and services mentioned. Note: Kudos+Plus products that connect through RollTop – USB Gateway, or RollTop – IPI Gateway do NOT support control from RollPod, RPAN, IQSPI or IQCGPI products.
  • Page 80 To connect to a USB enabled unit (TBS150, CVR400, TBS190, CVR600), see page 86. • To connect to an IP enabled unit (CVR700, TBS700, CVR800, TBS800, Mach HD), see page 88. Finally, the Log Server to be used (if required) can be specified. See page 91.
  • Page 81 3. Right click on the insync_ifp_cdc.inf file in this folder (C:\Program Files\RollCall\rolltop\insync_ifp_cdc.inf), and from the menu that appears, select Install. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 82 ‘Insync IFP Range’. 2. Select Include this location in the search and browse to the RollTop folder. (C:\Program Files\RollCall\rolltop) CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010...
  • Page 83 3. Wait for the new hardware wizard to search. 4. If this Hardware Installation warning appears, click Continue Anyway. 5. Click Finish to close the wizard. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 84 1. Double-click rolltop.exe to start the service. (C:\Program Files\RollCall\rolltop\rolltop.exe) 2. Check in the Windows Task manager to verify that the service is running. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 85 Note: For setups requiring connection to other RollCall networks, the RollCall IP Proxy should be used (advanced configuration settings to be advised). Refer to the RollCall Operator’s Manual if you require further information about RollCall. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 86 USB bus, this is also indicated. When the desired unit has been reached, click Set Unit and the information will be updated. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 87 3. Re-open the RollCall listing, and the unit can now be seen. The unit can now be connected to. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 88 Connecting to an IP Enabled Unit (CVR700, TBS700, CVR800, TBS800, Mach HD) 1. Open the RollCall listing and connect to the IPI Gateway. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 89 If a unit is found at the specified IP address, this is indicated as well as its name and type. The unit name can be changed if required. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion ©...
  • Page 90 4. Re-open the RollCall listing, and the unit can now be seen. The unit can now be connected to. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 91 Current Server: This displays the name of the Log Server to which log information is being sent. If no Log Server is found on the system it will display None. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion ©...
  • Page 92 2.3 It is possible to verify that your USB device has installed OK by checking for an appropriate USB driver. Check the USB device listing, Start > Control Panel > Hardware > Device Manager > Ports (COM & LPT) CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 93 “AT89C5153 CDC USB to UART MGM (COM16)” “InSync IFP Range” If you have more that one unit, you may see multiple devices listed. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd.
  • Page 94 Product Support Procedure If you experience any technical or operational difficulties with a Snell product please do not hesitate to contact us or utilize our online form to request assistance. There is a lot of information you can give us that will enable us to diagnose your problem swiftly. Please read the following guidelines, as these suggestions will help us to help you.
  • Page 95 Eastleigh Road, +44 (0) 118 921 4268 fax) Havant, Hants, Web: http://www.snellgroup.com/support PO9 2PE. United Kingdom. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 95...

  • Page 96: Manual Revision Record

    New Issue. 28/05/09 For software version 3.02 New Issue. For software version 3.04 17/11/10 New Issue. CVR800 3Gb/s, HD & SD SDI Standards Convertor with Synchronizer, Up, Down and Cross Conversion © Version 1 Issue 4 Snell Ltd. 2010 Page 96...

Table of Contents