1. Manuals
  2. Brands
  3. Snell Manuals
  4. Media Converter
  5. IQGBE4000-1A
  6. User instruction manual

Snell IQGBE4000-1A User Instruction Manual

Iqgbe40 series, iqgbe80 series ethernet fiber converter with 4/8 port switch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Instruction Manual
IQGBE40 and IQGBE80
Ethernet Fiber Converter with 4/8 Port Switch
snellgroup.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IQGBE4000-1A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Snell IQGBE4000-1A

Summary of Contents for Snell IQGBE4000-1A

  • Page 1 User Instruction Manual IQGBE40 and IQGBE80 Ethernet Fiber Converter with 4/8 Port Switch snellgroup.com...
  • Page 2 IQGBE Modules www.snellgroup.com © Issue 1 Rev 1 Page 2 2013 Snell Limited...

  • Page 3: Table Of Contents

    2.17.6 Viewing RollTrack Information ....... 28 © Issue 1 Rev 1 Page 3 2013 Snell Limited...
  • Page 4 IQGBE Modules www.snellgroup.com © Issue 1 Rev 1 Page 4 2013 Snell Limited...

  • Page 5: About This Manual

    Information in this manual and software are subject to change without notice and does not represent a commitment on the part of Snell Limited. The software described in this manual is furnished under a license agreement and can not be reproduced or copied in any manner without prior agreement with Snell Limited.
  • Page 6 IQGBE Modules www.snellgroup.com About this Manual Issue 1 Rev 1 Page 6 © 2013 Snell Limited...

  • Page 7: Iqgbe Modules

    WDM or CWDM techniques to transport multiple serial digital data streams over a single optical cable. 2.2 Block Diagram Fig 1. Block Diagram for IQGBE80-2A © Issue 1 Rev 1 Page 7 2013 Snell Limited...

  • Page 8: Rear Panel View

    2.3 Rear Panel View Ethernet fiber converter with 4 port switch. 3 copper Ethernet I/O, 1 Optical I/O Fig 2. IQGBE4000-1A, IQGBE4000-1B Ethernet fiber converter with 8 port switch. 6 copper Ethernet I/O, 2 Optical I/O Fig 3. IQGBE8000-2A, IQGBE8000-2B 2.4 Order Codes...

  • Page 9: Feature Summary

    Easily integrates into a CWDM system by using the 'express' channel of the IQCWM10 • SFP status monitoring • Front and rear of card power and port status LEDs • Rollcall control and monitoring compatible © Issue 1 Rev 1 Page 9 2013 Snell Limited...

  • Page 10: Technical Profile

    SFP Logging Type Status Connector Vendor Vendor Part Number Serial Number Rx Power State Rx Power Tx Power State Tx Power Wavelength Laser Bias Laser Bias State Table 3. Controls © Issue 1 Rev 1 Page 10 2013 Snell Limited...
  • Page 11 SFP 2 TX Pwr OK (IQGBE80 only) SFP 1 TX Bias FAIL SFP 2 TX Bias Fail (IQGBE80 only) SFP 1 TX Bias OK SFP 2 TX Bias OK (IQGBE80 only) Table 3. Controls © Issue 1 Rev 1 Page 11 2013 Snell Limited...

  • Page 12: Specifications

    LOS De Assert -19 dBm (max) LOS Assert -30 dBm (min) LOS Hysteresis 0.5 dB (min) Copper Interface Transceiver (FGAN FC1-GBE-CT5) Standard IEEE 802.3 interface Only operates at 1000Base-T Table 4. Specifications © Issue 1 Rev 1 Page 12 2013 Snell Limited...

  • Page 13: Connections

    2.7.1 Copper Interfaces IQGBE4000-1A/1B 10/100/1000Base-T connections to the unit are made via the RJ-45 connectors. Fig 4. IQGBE4000-1A, IQGBE4000-1B Copper Connections IQGBE8000-2A/2B SDI inputs to the unit are made via BNC/75ohm panel jack connectors. Fig 5. IQGBE8000-2A, IQGBE8000-2B Copper Connections 2.7.2 Fiber Connections...

  • Page 14: Sfp Modules

    Speed: Port is not applicable to this product/SFP not fitted. Yellow 10Mbps (e.g. 10Base-T) Green 100Mbps (e.g. 100Base-T) Blue 1000Mbps (e.g. 1000Base-T) White Link is DOWN Table 5. LED Operation © Issue 1 Rev 1 Page 14 2013 Snell Limited...

  • Page 15: Rear Led Status

    UP-100 - link is up, speed is 100Mbps • UP-1000 - link is up, speed is 100Mbps when an SFP is not fitted, that port's status will be shown in this screen as DOWN. Note: © Issue 1 Rev 1 Page 15 2013 Snell Limited...

  • Page 16: Port Status Screen

    For IQGBE40, 4 ports are shown in Fig 12. Fig 12. IQGBE40 RollCall Port Status Screen In Fig 12. SFP1 is not present, so that the status for Port 1 fields are shown as “-“. Note: © Issue 1 Rev 1 Page 16 2013 Snell Limited...

  • Page 17: Set Board Info Screen

    An example of Serial Number setting is shown below, where the example number S12345678 is typed in. The user should then click the Send button (S), and then click on Save button. Fig 15. IQGBE RollCall Set Board Info Serial Number Setting © Issue 1 Rev 1 Page 17 2013 Snell Limited...

  • Page 18: Setup Screen

    Until the serial number is set it will appear blank as shown in Fig 17. For details see Note: “Set Board Info Screen” on page 17. For IQGBE40, Port1-4 Names may be edited. Fig 17. IQGBE40 RollCall Setup Screen © Issue 1 Rev 1 Page 18 2013 Snell Limited...
  • Page 19 To change a name, type the name in the text field and click on the S button. To return the name to its factory default, click on the P button. Table 7. Setup Screen Information © Issue 1 Rev 1 Page 19 2013 Snell Limited...

  • Page 20: Logging

    Fig 19. IQGBE RollCall Logging Screen Ports 1 to 4 Logging Port 5 - 8 This screen shows logging for Ports 5-8. This screen is present for IQGBE80 only. Fig 20. IQGBE80 RollCall Logging Screen Ports 5 to 8 © Issue 1 Rev 1 Page 20 2013 Snell Limited...

  • Page 21: Logging Sfp1 (Port 1)

    In Fig 22. a Copper SFP is inserted, so that RX and TX parameters are hidden from this screen, and are not logged: Fig 22. Logging a Copper SFP 1 (Port 1) © Issue 1 Rev 1 Page 21 2013 Snell Limited...

  • Page 22: Logging Sfp2 (Port 5)

    Log Enable: Select the check boxes that correspond to the parameters for which log information should be collected. • Log Field: Displays the name of the logging field. • Log Value: Displays the current log value. © Issue 1 Rev 1 Page 22 2013 Snell Limited...

  • Page 23: Rollcall Log Fields

    <Fixed input identifier> PORT 1 (default) PORT_8_NAME= <Fixed input identifier> PORT 8 (default) PORT_1_LINK_STATUS= <Port 1 link status> OK: Up WARN: Down PORT_8_LINK_STATUS= <Port 8 link status> Table 9. Log Table © Issue 1 Rev 1 Page 23 2013 Snell Limited...
  • Page 24 <SFP 1 wavelength> 1310nm SFP_2_WAVELENGTH <SFP 2 wavelength> SFP_1_RX_POWER_STATE <Rx SFP 1 power alarm/warning state> WARN:LOW FAIL:LOW WARN:HI FAIL:HI <Rx SFP 4 power SFP_2_RX_POWER_STATE alarm/warning state> Table 9. Log Table © Issue 1 Rev 1 Page 24 2013 Snell Limited...

  • Page 25: System-Rolltrack Screen

    Configure up to 16 RollTrack outputs. • Specify the conditions that trigger RollTrack data transmission. • Set RollTrack destinations. • Specify the RollTrack commands to be sent. Fig 25. RollTrack Screen © Issue 1 Rev 1 Page 25 2013 Snell Limited...

  • Page 26: Rolltrack Sources

    SFP 1 TX Pwr OK SFP1 TX power ok SFP 1 TX Bias FAIL SFP1 TX bias failure SFP 1 TX Bias OK SFP1 TX bias OK Table 10. RollTrack Sources © Issue 1 Rev 1 Page 26 2013 Snell Limited...

  • Page 27: Rolltrack Addresses

    Enter the RollTrack Address and click the S button. To return the address to its default value, click the preset P button. Enter the RollTrack Command and click the Set S button. To return the value to its default, click the Preset P button. © Issue 1 Rev 1 Page 27 2013 Snell Limited...

  • Page 28: Viewing Rolltrack Information

    Bad: RollTrack message has not been sent correctly, acknowledged at the destination unit. This could be because the destination unit is not of the type specified. • Disabled: RollTrack sending is disabled. © Issue 1 Rev 1 Page 28 2013 Snell Limited...

This manual is also suitable for:

Iqgbe4000-1bIqgbe8000-2bIqgbe8000-2a

Table of Contents