1. Manuals
  2. Brands
  3. Snell Manuals
  4. Media Converter
  5. Mach HD
  6. Operator's manual

Snell Mach HD Operator's Manual

Hd & sd motion compensated standards converter with synchronizer, up, down, and cross conversion
Hide thumbs Also See for Mach HD:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Instruction Manual
Mach HD
(Version 2)
HD & SD Motion Compensated Standards Converter with
Synchronizer, Up, Down, and Cross Conversion
Operator's
Manual
© November, 2009
Snell Ltd., Southleigh Park House, Eastleigh Road, Havant, Hants, PO9 2PE, United Kingdom.
For General Enquiries contact:
Tel: +44 (0) 2392 489000
Fax: +44 (0)23 9245 1411
For Technical assistance contact: Tel: +44 (0) 118 921 4214
Fax: +44 (0) 118 921 4268
Web:
http://www.snellgroup.com/support

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mach HD and is the answer not in the manual?

Questions and answers

Related Manuals for Snell Mach HD

Summary of Contents for Snell Mach HD

  • Page 1 Synchronizer, Up, Down, and Cross Conversion Operator’s Manual © November, 2009 Snell Ltd., Southleigh Park House, Eastleigh Road, Havant, Hants, PO9 2PE, United Kingdom. For General Enquiries contact: Tel: +44 (0) 2392 489000 Fax: +44 (0)23 9245 1411 For Technical assistance contact: Tel: +44 (0) 118 921 4214...

  • Page 2: Safety Warnings

    Attention si l'appareil a 2 alimentations, s'assurer que les cordons de que ambos cables de alimentación están conectados a la misma fase. soient branchés sur la même phase. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 3 Varning! Om enheten har två huvudsakliga elförsörjningar, säkerställ att on liitettävä verkkopistorasioihin, joissa on sama vaiheistus. båda strömkablarna som är inkopplade i enheten arbetar från samma fas. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 4 Note that for equipment that is not fitted with a mains power switch, to comply with EN60950 Clauses 1.7.2 and 2.6.9, the power outlet supplying power to the unit should be close to the unit and easily accessible. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 5 EMC Performance of Cables and Connectors Snell products are designed to meet or exceed the requirements of the appropriate European EMC standards. In order to achieve this performance in real installations it is essential to use cables and connectors with good EMC characteristics.

  • Page 6: About This Manual

    Information in this manual and software are subject to change without notice and does not represent a commitment on the part of Snell Ltd. The software described in this manual is furnished under a license agreement and may not be reproduced or copied in any manner without prior agreement with Snell Ltd. or their authorized agents.

  • Page 7: Table Of Contents

    Appendix A: Automated Aspect Ratio Control ..................56 Appendix B: Upgrade procedure ......................59 Appendix C: Kudos+ USB/IP Gateway ....................66 Manual Revision Record...........................83 Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...

  • Page 8: Description

    Status tab of the Web interface or the front panel display. It is not possible to upgrade a Mach HD version 2 to a Mach HD version 3 due to the change of hardware between these versions.

  • Page 9: Technical Profile

    Passes captions between CEA608 (SD) and the 608 compatibility space in CEA708 (HD), dropping and repeating null packets. HD to HD passes full CEA708 packet with simple synchronisation. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 10 24 bit; THD , -91dB and +24dBu, flatness 20Hz – 20KHz ±0.05dB wrt 1KHz Audio Out 2 x Stereo Analog 24 bit; < -87 dB at -1dBFS Audio In Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 10...
  • Page 11 +12 to +24dBu in 0.5 dBu steps output level Tone Frequency: 100Hz to 10kHz in 100Hz steps Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 11...
  • Page 12 CEA708 Output line number (1080i/P & 720P); enable Processing Scaling/De- Horizontal scaling employs a linear filter interlacing Color matrix Automatic correction with HD/SD conversions Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 12...
  • Page 13 (minimum) and 2 fields plus 0.4 ms (maximum). For ARC mode, there must be at minimum 4 fields of delay as the Mach HD must load at least 3 fields of data to be able to do the aspect ratio conversion with 'still mode' processing. In input-locked mode, the ARC delay could be just 4 fields. However, if the user is synchronizing the output to a chosen reference, as in Sync mode above, depending on the reference, and up to an additional 2 fields + 1ms (maximum) delay may be incurred.

  • Page 14: Installation

    Clauses 1.7.2 and 2.6.9, the power outlet supplying power to the unit should be close to the unit and easily accessible. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 15 AES audio input is via the 25 way D-Type connector. Analogue Audio Analogue audio input is via the 25 way D-Type connector. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 15...
  • Page 16 Control Connections Ethernet Connection to a Web browser can be made via the 10/100 BaseT Ethernet connection. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 16...
  • Page 17 GND8 AES In Pair 1 ‘G’ GND8 Analog In Pair 1 left ‘G’ D-Type Connector (On Unit) Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 17...
  • Page 18 Audio 1 Audio ADC Audio A Audio Control Audio 2 Audio ADC Audio B Audio Ethernet Remote Control Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 18...

  • Page 19: Operation Via The Front Panel

    These buttons provide access to the unit’s Video, Image, Genlock, Audio In and Audio Out menus, as well as to the More menu, which provides access to additional setup functions. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 20 Note that for this and most other menus: To return to the default menu press Back or wait for the time out. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 21 Output Options • 625i Back Output • 525i • 720P50 Select -625i- • 720P59.94 • 1080i50 • 1080i59.94 Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 21...
  • Page 22 Back Color Saturation +6dB in 0.2dB steps. Preset 0.0dB Preset will return the Chroma Gain to 0dB. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 22...
  • Page 23 Rotate the knob to select the SD output format. Back SD Output Format The available options are: • Normal 4:3 Select • 16:9 An Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 23...
  • Page 24 ARC settings; for Line Blanking example, SD16:9AN to SD4:3 Fit to Width. Select Off Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 25 This control does not have any effect if the Custom preset is not selected. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 26 Normal: nominally flat frequency response • Sharp1, Sharp2, Sharp3: progressively more boost in the frequency band of interest. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 26...
  • Page 27 • High1: recommended for slightly soft source material • High2: recommended for extremely soft source material Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 27...
  • Page 28 This control Enables or Disables pair routing for Back Pair Routing B audio input pair B. Select Enabled Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 28...
  • Page 29 This control Enables or Disables pair routing for audio input pair D. Select De-embed ch 8 Back Pair Routing D Select Enabled Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 29...
  • Page 30 AES inputs are used in the Audio In selection process. Select Balanced • Balanced • Unbalanced Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 30...
  • Page 31 Rotate the knob to adjust the pair gain ±18dB in Preset 0.0dB 0.1dB steps. The preset value is 0dB. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 31...
  • Page 32 Preset 18.0 dBu DAC 2 outputs audio selected under the Audio B tab. The preset value is 18.0 dBu. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 33 For example, 720p 50 will not lock to 1080i 59.94 . Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 34 93% of the effective picture height and Back Safe area marks width. Select • • 16:9 • Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 34...
  • Page 35 See “Operation via the Web interface” for more details. • • ETSI • Force • Delete Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 35...
  • Page 36 VI Pass Data data other than coded frame and AFD are blanked, or passed from the input if selected. Enable Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 37 14/9 top • 16/9 centre • 16/9 top • >16/9 centre • 4:3 SP 14/9 • 16/9 FF Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 37...
  • Page 38 See “Operation via the Web interface” for more details. • 4/3 AFD 0 to 7 • 16:9 AFD 0 to 7 Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 38...
  • Page 39 20 (in steps of 1 line). The preset value is Select Line 9 line 9. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 39...
  • Page 40 In DHCP mode, it will display 0.0.0.0 when disconnected from the network. MAC Address This displays the unit’s MAC address. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...

  • Page 41: Operation Via The Web Interface

    Operation via the Web Interface In addition to the unit front controls, the Mach HD can also be controlled by means of a Web interface accessed via the 10/100 BaseT Ethernet connection. Connection to the Web interface can either be made directly or via a DHCP network.
  • Page 42 3. Connect to the unit by entering the given address into your web browser, preceded by “http://” if necessary. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 43 Red indicates that the browser is not currently controlling the unit, while green indicates the connection is functioning normally. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 44 This displays the current L23 output signaling type. Output VI This displays the current Video Index output signaling type. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 45 Click the corresponding radio button to select: • SDI A • SDI B Input standard is automatically detected. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 45...
  • Page 46 Allows the source half lines to be blanked. This can be useful for certain ARC settings; for example, SD16:9AN to SD4:3 Fit to Width. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 47 This control is only effective if the input and output formats are identical. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 48 This control does not have any effect if the Custom preset is not selected. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 49 • Sharp1: recommended for slightly soft source material • Sharp2: recommended for extremely soft source material Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 49...
  • Page 50 Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 51 VI data other than coded frame and AFD are blanked, otherwise, they are passed from the input if appropriate. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 52 L23 force bits: • Determines whether the L23 user bits set above are forced into the L23 output. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 52...
  • Page 53 The options on the Signaling 2 tab specify the output that will be forced if the corresponding Force option is selected on the Signaling 1 tab. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 54 8 is selected for Audio in A – Left the unit will automatically route ch 9 to Audio in A – Right. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 55 AB will be embedded. Tone Frequency Use the slider to adjust the tone frequency between 100Hz and 10kHz in 100Hz steps. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...

  • Page 56: Appendix A: Automated Aspect Ratio Control

    Normal 16/9 4/3 AFD 7 Reserved Normal 4/3 Normal 16/9 4/3 AFD 12 Reserved Normal 4/3 Normal 16/9 Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 56...
  • Page 57 Normal 16/9 16/9 AFD 7 Reserved 16/9 Anamorphic Normal 16/9 16/9 AFD 12 Reserved 16/9 Anamorphic Normal 16/9 Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 57...
  • Page 58 16/9 SD 16/9 16/9 AFD 8 Coded 16/9 16/9FF Anamorphic Anamorphic Anamorphic Frame AFD 0- Coded Frame Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 58...

  • Page 59: Appendix B: Upgrade Procedure

    1. Confirm the IP address of the unit being upgraded. To do this, press the More button on the front of the unit and then scroll through to menu to Current IP add. Press Select, and note the IP address. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 60 2. On the PC, open a Web browser. In the address bar enter the IP address of the unit to be upgraded. Enter the unit’s IP Address Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 61 PC. Click the upgrade link in the lower-left corner of the browser window. Upgrade link Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 62 Click the Fetch available upgrade link. 5. The following page is now displayed. Click on the link to download the “.ieu” file. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 63 6. A dialog appears, prompting you to save the file. Save the file to a suitable location on a local drive. 7. Click back to unit. 8. This page is displayed. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 64 Note that the upgrade process may take up to 10 minutes. Once the file transfer is complete, the software should self install. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 65 11. To check that the new software has installed, press the More button and then scroll down to Version. Select this and check that it reflects the new update: Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...

  • Page 66: Appendix C: Kudos+ Usb/Ip Gateway

    Mach-1 The RollTop application is available free of charge from the Snell Service department. Please contact your local Snell Sales office for more information about the other RollCall applications and services mentioned. Note: Kudos+Plus products that connect through RollTop – USB Gateway, or RollTop – IPI Gateway do NOT support control from RollPod, RPAN, IQSPI or IQCGPI products.
  • Page 67 To connect to a USB enabled unit (TBS150, CVR400, TBS190, CVR600), see page 10. • To connect to an IP enabled unit (CVR700, TBS700, CVR800, TBS800, Mach HD), see page 12 Finally, the Log Server to be used (if required) can be specified. See page 15.
  • Page 68 2. Unzip the contents of the provided ZIP file into this folder. 3. Right click on the insync_ifp_cdc.inf file in this folder (C:\Program Files\RollCall\rolltop\insync_ifp_cdc.inf), and from the menu that appears, select Install. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 69 ‘Insync IFP Range’. 2. Select Include this location in the search and browse to the RollTop folder. (C:\Program Files\RollCall\rolltop) Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 70 3. Wait for the new hardware wizard to search. 4. If this Hardware Installation warning appears, click Continue Anyway. 5. Click Finish to close the wizard. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 71 1. Double-click rolltop.exe to start the service. (C:\Program Files\RollCall\rolltop\rolltop.exe) 2. Check in the Windows Task manager to verify that the service is running. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 72 Note: For setups requiring connection to other RollCall networks, the RollCall IP Proxy should be used (advanced configuration settings to be advised). Refer to the RollCall Operator’s Manual if you require further information about RollCall. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 73 USB bus, this is also indicated. When the desired unit has been reached, click Set Unit and the information will be updated. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 74 3. Re-open the RollCall listing, and the unit can now be seen. The unit can now be connected to. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 75 Connecting to an IP Enabled Unit (CVR700, TBS700, CVR800, TBS800, Mach HD) 1. Open the RollCall listing and connect to the IPI Gateway. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 76 If a unit is found at the specified IP address, this is indicated as well as its name and type. The unit name can be changed if required. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 77 4. Re-open the RollCall listing, and the unit can now be seen. The unit can now be connected to. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009...
  • Page 78 Current Server: This displays the name of the Log Server to which log information is being sent. If no Log Server is found on the system it will display None. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 79 2.3 It is possible to verify that your USB device has installed OK by checking for an appropriate USB driver. Check the USB device listing, Start > Control Panel > Hardware > Device Manager > Ports (COM & LPT) Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 80 “AT89C5153 CDC USB to UART MGM (COM16)” “InSync IFP Range” If you have more that one unit, you may see multiple devices listed. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 ©...
  • Page 81 Product Support Procedure If you experience any technical or operational difficulties with a Snell product please do not hesitate to contact us or utilize our online form to request assistance. There is a lot of information you can give us that will enable us to diagnose your problem swiftly. Please read the following guidelines, as these suggestions will help us to help you.
  • Page 82 +44 (0) 118 921 4214 (tel) Eastleigh Road, +44 (0) 118 921 4268 fax) Havant, Hants, Web: http://www.snellgroup.com/support PO9 2PE. United Kingdom. Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 82...

  • Page 83: Manual Revision Record

    Manual Revision Record Date Version No. Issue No. Change Comments 23/11/09 For V2.09. First Issue Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion Version 1 Issue 1 © Snell 2009 Page 83...

This manual is also suitable for:

5068000

Table of Contents