Gallery; Review; Delete All Images - Fluke VT08-II User Manual

Menu Option
DateTime
Language
Reset
Format SD
PIPTransparent
(VT08/VT08-II only)
Camera Info

Gallery

The following sections describe the options available in the Gallery submenu.

Review

You can review an image in the internal memory storage and delete the image if you do not
need it.
To review and delete an image:
1. In the Gallery submenu, push W or X to highlight Review.
O
2. Push to review the first image.
3. Push W to review the previous image or push X to review the next image.
O
4. Push and push W or X to highlight √, then push

Delete all images

To delete all images at the same time:
1. In the Gallery submenu, push W or X to highlight Delete all images.
O
2. Push and push W or X to highlight √, then push
Table 6. Main Menu Options (cont.)
Set the date and time. See DateTime.
Select the language displayed on the screen:
English

Korean

Japanese

Reset the Meter settings. See Reset.
Format the internal memory storage. After you begin the
formatting, be sure to wait until you see the Formatted
message before making another selection.
Set the transparency of an infrared picture in PIP mode.
See PIPTransparent (VT08/VT08-II
View the Meter information including version, firmware
version, serial number, SD card status, and ID.
Visual IR Thermometer
Function
Simplified Chinese

Traditional Chinese

Only).
O
again to delete this image.
O
again to delete all images.
Main Menu
11