! Putting of the PAD Insulation Sheet
TOP Case Assy
0~0.5mm
Front side
TP Bottom Tape
Don't overflow.
Core side
Core side
! Assembly of TOP CASE ASSY
0~0.5mm
HDD Side Spacer
0~0.5mm
After connecting the FFC
Details of cable arrangement
Right side
Keep the 1 mm space between
the Top Case and the rib.
Gasket
Attach to the indent portions
for the USB.
Screw
PAD PCB
Check a lock after the insertion
PCMCIA Cushion
PAD Card Insulation Sheet
0~0.5mm
Remove the Release Paper
and attach it to the Top Case.
Kensington Plate
0~0.5mm
0~0.5mm
Kensington Plate
Tape
0~0.5mm
Kensington Lock Plate
Gasket
LED PCB
Fit it to the pin
and attach it.
0~0.5mm
SW Spring
Detail of "A"
A
Hook on the protrusions of the boss and the Power Switch.
7-21
0~0.5mm
0~0.5mm
Touch PAD
Remove the Release
Paper and attach it.
After attaching it,
connect to the Connector.
Attach here.
(0 ~ 0.3mm)
0~0.5mm
0~0.5mm
Safety Working
Check a lock after the insertion
Click Button Sheet
Avoid running over the side.
Apply the load to attach.
30 to 40N (3.0 to 4.0Kgf)