Panasonic TOUGHBOOK CF-18 Service Manual page 21

3. Remove the KBD Plate.
1
2
4. Lift the far side of the Keyboard and slide it to backward,
and then turn the Keyboard over frontward.
<C>
KBD
Connector
Cover
5. Remove the three Screws <C>.
6. Remove the KBD Connector Cover.
Keyboard
FPC
TP Tape
Touch Pad
Click Button
Plate
Connector
(CN800)
7. Disconnect the Cable from Connector (CN18).
8. Remove the Keyboard.
Screws <B>:DRSB2+5FKL
Screws <C>:DFHE5025XA
7.1.4.
Keyboard
Screws <D>: DRQT2+D2FKL
Keyboard
Screws <E>: DRHM5025YA
7.1.5.
Connector
(CN18)
Screws <F>:DRHM0061ZA
7-2
9. Remove the TP Tape.
10. Disconnect the Cable from Connector (CN800).
11. Remove the Touch Pad and Click Button Plate.
Removing the Speaker Angle and
DIMM Lid
<D>
<E> <D>
<D>
Speaker
Waterproof
Sheet
Speaker Unit
Speaker Washer
Speaker Cable
Tube
Speaker Angle
Connector (CN37)
1. Remove the four Screws <D>.
2. Disconnect the Cable from Connector (CN37).
3. Remove the DIMM Lid.
4. Remove the two Screws <E>.
5. Remove the Speaker Angle.
Removing the Rear Cabinet
<F>
<F>
<F>
<F>
<F>
<F>
<F>
1. Remove the thirteen Screws <F>.
2. Open the LID Rubbers.
3. Remove the Rear Cabinet.
<E> <D>
DIMM Lid
DIMM LID Sheet
<F>
<F>
<F>
<F>
<F>
<F>