Panasonic TOUGHBOOK CF-18 Service Manual page 36

7.2.6. Setting the Display Unit
1. Fix the Display Unit using the 2 Screws <T>.
2. Close the Display Unit and turn the computer over, and
then fix the Display Unit using the 4 Screws <U>.
! Assembly of Display Unit
Safety Working
Note
Avoid any stress on the Cable.
Detail of "A"
Hinge Cover
Cable
Cushion
LCD Cable
white/black blue/ glay/brown
LCD UNIT
Top Case Assy
A
Pass all of the Cables into the KBD Hole.
<T>
Hinge Cover
<T>
<U>
<U> <U>
<U>
3. Turn the computer over and fix the LCD Hinge Cover
using the 2 Screws <S>.
4. Open the Display Unit and fix the LCD Hinge Cover using
the 2 Screws <S>.
Screws <S> : DFHE5025XA
Screws <T> : DRSB2+5FKL
Screws <U> : XYN4+J8FNL
LCD Hinge Cover
<S>
<S>
< Order of fixing screw>
Close the LCD and
turn it over.
7-17
<S>
<S>
Screw<U> Screw<U>
Screw<U>
Screw<U>
Take out the Cables.