BGS technic BGS 9992 Quick Start Manual

with Hand Pump and 8 Adaptors | 7 l

SPECIFICATIONS

Tank capacity: 7L
Transfer capacity: 80ccm / Hub
Viscosity range: SAE 0 – 140
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

INTENDED USE

This product is designed for filling manual transmissions, automatic transmissions, differentials and
transfer cases with oil, included 8 adapter and it is suitable for e.g. Ford, BMW, Honda, Mini,
Mercedes, Nissan, VW, Audi, Porsche.
SAFETY INFORMATIONS
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set.
• Do not carry out any modifications on the tool.
• These operating instructions serve to illustrate the tools and in no way replace vehicle-specific
service literature, please refer to data and other important information on repairs.
• Vehicle-specific service literature should always be available for all tests and repairs; without
this, incorrect diagnoses and repairs cannot be ruled out.
• Always be careful when handling oils, clean up spilled oil directly and always dispose of used oil
in an environmentally friendly manner.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Transmission Oil Filling Tool
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9992
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed