Bios Setup; Entering Bios Setup - National Instruments NI PXI-8104 User Manual

Hide thumbs Also See for NI PXI-8104:
Table of Contents

Advertisement

BIOS Setup

Caution
Changing BIOS settings may lead to incorrect controller behavior and possibly
an unbootable controller. If this happens, follow the instructions for restoring default
settings in the
absolutely certain what it does.

Entering BIOS Setup

© National Instruments Corporation
You can change the NI PXI-8104 configuration settings in the BIOS setup.
The BIOS is the low-level interface between the hardware and PC software
that configures and tests your hardware when you boot the system. The
BIOS setup program includes menus for configuring settings and enabling
NI PXI-8104 controller features.
Most users do not need to use the BIOS setup program, as the NI PXI-8104
controller ships with default settings that work well for most
configurations.
System CMOS
section. In general, do not change a setting unless you are
To start the BIOS setup utility, complete the following steps:
1.
Power on or reboot your NI PXI-8104 controller.
2.
When the message
the Delete key on the keyboard. The message
appears, and the setup program is loaded after a short delay.
3.
When you first enter the BIOS setup program, it displays the Main
menu.
Use the following keys to navigate through the BIOS setup:
Left Arrow, Right Arrow—Use these keys to move between the
different setup menus. If you are in a submenu, these keys have no
effect, and you need to press <Esc> to leave the submenu first. (To use
the arrows on the numeric keypad, you must turn off Num Lock.)
Up Arrow, Down Arrow—Use these keys to move between the
options within a setup menu. (To use the arrows on the numeric
keypad, you must turn off Num Lock.)
<Enter>—Use this key either to enter a submenu or display all
available settings for a highlighted configuration option.
<Esc>—Use this key to return the parent menu of a submenu.
At the top-level menus, this key serves as a shortcut to the Exit menu.
Chapter 2
Press <DEL> to enter SETUP
2-5
Installation and Configuration
appears, press
Entering Setup
NI PXI-8104 User Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ni pxi-8221

Table of Contents