Advertisement
WARNING: Turn off the appliance, unplug and let cool for at least 10 minutes before
attempting to service. Only a qualified professional should
attempting
appliance.
PROBLEM
1.No power, no indicator lights
2.No power, no indicator lights
3.Log glow, but no flame
4.Flame and logs glow, but no heat
5.Heater and /or flame turn off while
operating
POSSIBLE CAUSE
Insert was not plugged in
No power at outlet
Flame spinner disconnected
Heater switch is off
Timer function may been on
attempt to service or repair the
mpt
CORRECTIVE ACTION
Make sure that power cord is plugged
into 120V outlet
Check circuit breaker or fuse
Call customer service for instructions
Push heater button. Indicator light will
come on
Push On/Off button to reset
15
Advertisement
