Advertisement
>Power supply service must be completed prior to finishing to avoid
reconstruction.
>Heater vents and air openings cannot be covered in any circumstances.
Once the unit has been properly connected to a grounded
electrical outlet, it is ready to operate.
Note: Ensure the house circuit breakers for the power
supply are turned on.
Main Power Switch:
The Main Power Switch is located on the right side of the unit.
Figure 4 illustrates the location of the switch. The"I"indicates
ON and "O" indicates OFF. Push the switch to"I"to turn on the
unit and the flame effect. The red LED}ndicator will be turned on
12
Advertisement
