Download Print this page
Hanover CAM14FSFP-1BLK Instructions Manual

Hanover CAM14FSFP-1BLK Instructions Manual

Advertisement

Quick Links

Installation and Operation Instructions
ELECTRIC FIREPLACE
CAM14FSFP-1BLK
REV20-01

Advertisement

loading

Summary of Contents for Hanover CAM14FSFP-1BLK

  • Page 1 Installation and Operation Instructions ELECTRIC FIREPLACE CAM14FSFP-1BLK REV20-01...
  • Page 2: Table Of Contents

    Important Safety Instructions Listing Approvals Operating Instructions Maintenance Trouble shooting...
  • Page 3: Important Safety Instructions

    CONSUMER SAFETY INFORMATION Read this manual before installing and operating this appliance. Failure to follow these instructions may result in electric shock, fire property damage, personal injury and will void the warranty. Requires the use of Fireplace Mantel. Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this appliance.
  • Page 4 12. All electrical heaters have hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored or where the appliance will be exposed to flammable vapors. 13. Avoid using the appliance with an extension cord. Extension cords may overheat and cause a risk of fire.
  • Page 5: Listing Approvals

    LISTING APPROVALS This heater has been tested in accordance with the CSA Standards. Model Number: XFRST1416-1 Voltage: 110-120V AC, 60Hz Watts: MAX 1350W Length: 14.6 17.7 Height: Depth:...
  • Page 6: Operating Instructions

    OPERATING INSTRUCTIONS Read all instructions and warning prior to operating the appliance. Ensure that all control are in the "OFF" position before plugging the appliance into a properly grounded electrical outlet. Controls are located on the back of heater Your heater stove is now ready for operation: For flame affect only, Slide ON / OFF switch to the ON position.
  • Page 7: Maintenance

    MAINTENANCE WARNING: Before attempting to perform any maintenance on this appliance, turn all controls to the "OFF" position and unplug the heater. Allow the appliance to be "OFF" for at least 10 minutes before performing any maintenance in order to allow all components to cool properly.
  • Page 8: Trouble Shooting

    Care and maintenance: Turn heater OFF and unplug from electrical outlet before any cleaning or maintenance is performed. Keep combustible materials such as furniture, pillows, bedding, papers, clothing, and curtains at least 3feet (0.9meter) away from fireplace. Use a vacuum or duster to keep heat and vent area clean from dust and dirt. The exterior of the fireplace should be cleaned with a damp cloth or duster.

This manual is also suitable for:

Xfrst1416-1