NOTE
The Back Button on the remote control can be used to return previous menu item.
Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for Image Position and Phase are saved for each signal timing. Except for these
adjustments, all other adjustments have only one setting which applies to all signal timings.
Direct
* Available for Remote Control only.
Freeze Function:
Press the Blue button when Menu is not displayed.
Repeat successively to activate/deactivate the function.
Backlight Function:
Press the Screen Off button when Menu is not displayed.
Repeat successively to On/Off the function.
Input Function:
Press the Input Button when Menu is not displayed.
Volume Function:
Press the VOL+/VOL- Buttons when Menu is not displayed.
Mute Function:
Press the
Button when Menu is not displayed.
Repeat successively to On/Off the function.
Kiosk Mode Function:
Disable touch functions, buttons, Menu etc.
Turn off "iiWare Enable" in Debug menu (Input + 2580)
[LOCK MODE]
* Available for Remote Control only.
Front Power Button:
Press the Green Button when Menu is not displayed, will lock/unlock the Front Power Button.
Touch function:
Press the Yellow Button when Menu is not displayed, will lock/unlock the Touch function.
Front Power Button & Touch function:
Press the Red Button when Menu is not displayed, will lock/unlock the Front Power Button and
Touch function.
OPERATING THE MONITOR 23