Iiyama ProLite TE8604MIS User Manual
  1. Manuals
  2. Brands
  3. Iiyama Manuals
  4. Monitor
  5. ProLite TE8604MIS
  6. User manual

Iiyama ProLite TE8604MIS User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

USER MANUAL
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.

Advertisement

Table of Contents
loading

Related Manuals for Iiyama ProLite TE8604MIS

Summary of Contents for Iiyama ProLite TE8604MIS

  • Page 1 USER MANUAL ENGLISH Thank you very much for choosing the iiyama LCD monitor. We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor. Please keep this manual in a safe place for...
  • Page 3 IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands Model No. : PL8604U, PL7504U, PL6504U We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com You can access the Web page of different countries from there.

  • Page 4: Table Of Contents

    SCREEN ADJUSTMENTS ............43 STANDBY FEATURE ..............46 TROUBLE SHOOTING ..............47 RECYCLING INFORMATION .............48 APPENDIX ..................49 SPECIFICATIONS : ProLite TE8604MIS ........49 SPECIFICATIONS : ProLite TE7504MIS ........51 SPECIFICATIONS : ProLite TE6504MIS ........53 DIMENSIONS : ProLite TE8604MIS ..........55 DIMENSIONS : ProLite TE7504MIS ..........55 DIMENSIONS : ProLite TE6504MIS ..........56...

  • Page 5: For Your Safety

    DO NOT PUT ANY OBJECT INTO THE MONITOR Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage.
  • Page 6 CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.

  • Page 7: Special Notes On Lcd Monitors

    SPECIAL NOTES ON LCD MONITORS  The following symptoms are normal with LCD monitors and do not indicate a problem. - When you first turn on the LCD monitor, the picture may not fit in the display area NOTE because of the type of computer that is used. In this case, adjust the picture position to the correct position. - You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
  • Page 8 1 hour and there is evidence of a residual or “ghost” image, you should turn off the monitor for 1 hour in order to clear the residual image. For all LFD products, iiyama recommends displaying moving images and utilising a moving screen saver at regular intervals whenever the screen is idle. You could also turn off the monitor when not in use to assist the prevention.

  • Page 9: Customer Service

     If you drop any materials or liquids such as water into the monitor when cleaning, WARNING unplug the power cable immediately and contact your dealer or iiyama service center.  For safety reasons, turn off the power switch and unplug the monitor before you CAUTION clean it.

  • Page 10: Before You Operate The Monitor

    CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.  Power Cable* ...

  • Page 11: Unpacking

    UNPACKING CAUTION Moving the monitor requires at least two people. If not, it may drop and could result in a serious injury. SPECIAL NOTES ON THE TOUCH PANEL CAUTION Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch. This could invalidate any remaining warranty.

  • Page 12: Installation

    INSTALLATION CAUTION  Follow the manual instructions for the type of mount you have selected. Refer all servicing to qualified service personnel.  Moving the monitor requires at least two people.  Before installation, please make sure the wall is strong enough to hold the necessary weight of the display and the mount.
  • Page 13 [INSTALLATION NOTE] The touch kit of this monitor is an optical device that utilizes infrared light source and sensitive sensors for touch detection. Notice the incident light that contains large quantities of infrared light may affect touch screen operation and performance. Please install it with care as follows to ensure reliable touch performance.

  • Page 14: Controls And Connectors : Monitor

    CONTROLS AND CONNECTORS : MONITOR <Front> Power Off Power Button Pressing and holding the Power Button on the front for 3-5 seconds. White Normal Operation Standby Mode When the power indicator light is lighting red, the display is in Power Save Mode. To turn the screen back on, you can press the power button on the front or the remote control.
  • Page 15 <Back> Option PC module slot HDMI Connector (HDMI OUT) HDMI USB Connector (3.0) USB3.0 (5V, 900mA) Touch USB Connector (TOUCH 1) USB (for HDMI1/HDMI2) HDMI Connector (HDMI IN 1) HDMI HDMI Connector (HDMI IN 2) HDMI HDMI Connector (HDMI IN 3) HDMI Touch USB Connector (TOUCH 2) USB (for HDMI3/VGA) USB-C Connector (USB-C3.1 PD 65W) USB-C3.1 (5V, 3A / 9V, 3A / 12V, 3A / 20V, 3.25A) SPDIF Connector (SPDIF) SPDIF Output USB Connector (2.0) USB2.0 (for software update) VGA Connector (VGA) Audio Connector (AUDIO IN) Mini Jack LAN(RJ45) Connector (LAN) RJ45 (In/Out auto switching) RS232C Connector (RS232) RS232C 9pin Headphone Connector (AUDIO OUT) Mini Jack Option WiFi/BT module slot AC Connector ( : Alternating current)

  • Page 16: Controls : Remote Control

    CONTROLS : REMOTE CONTROL Turn the monitor ON and OFF. Number (1-9) / Under iiWare: 0-9 numeric input Other / Under Windows: 0-9 numeric input, Function (F1- Start/Space/ALT+Tab/ALT+F4/F1-12 F12) for Keyboard function Provide source and resolution Display information. Home Android system main screen button. Input Select the source.

  • Page 17: Preparing The Remote Control

    PREPARING THE REMOTE CONTROL To use the remote control, insert the two dry batteries. CAUTION  Do not use any other batteries other than those specified in this manual for the Remote Control.  Do not insert old and new batteries together in the Remote Control.  Make sure that the terminals match the "+" and "-" indications in the battery compartment. ...
  • Page 18 NOTE  Refer to the above instructions when taking out the batteries.  Replace with new batteries when the Remote Control does not work close to the monitor. Use AAA dry batteries. Risk of explosion if battery is replaced by an incorrect type. ...

  • Page 19: Basic Operation

    BASIC OPERATION  Turning the monitor ON The monitor is turned On and the Power Indicator turns to White when you press the Power Button on the monitor or the Remote Control. The monitor is turned Off and the Power Indicator turns to Red when you press the Power Button on the monitor or the Remote Control. Press again to turn On the monitor.
  • Page 20  Move the cursor vertically Select adjustment by pressing the Button on the remote control while the menu page is displayed on the screen. [Remote Control]  Move the cursor horizontally Select menu or setting, or perform the adjustment by pressing the Button on the remote control while the menu page is displayed on the screen.
  • Page 21  Adjust the volume of sound Press the VOL- / VOL+ Button on the remote control to adjust the volume of sound when the menu page is not displayed on the screen. [Remote Control]  Switch the input signal The Input setting menu appears on the screen when you press the Input Button on the remote control.

  • Page 22: Connecting Your Monitor

    An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
  • Page 23 * VGA cable is not supplied with the monitor. If you use low quality VGA cable, it may cause a result of electro-magnetic interference. Please contact the iiyama Support Centre in your country if you wish to connect the monitor via the VGA input.
  • Page 24 [ Connection example with the peripheral device ] CAUTION Turn off the power switch and unplug the monitor and peripherals before connection to avoid an electric shock or a damage. NOTE  Refer to the user manual of peripherals at the same time. ...
  • Page 25 Contact iiyama service center in case you want to enable this function. Connection conditions NOTE  When 2 monitors are connected: VGA input (operating at 1920 × 1080 resolution) : MONITOR1,2 (1920 × 1080) USB-C input (operating at 3840 × 2160 resolution) : MONITOR1,2 (3840 × 2160)  For the advance setting support HDMI in signal and iiWare, please contact to iiyama service center. BEFORE YOU OPERATE THE MONITOR 21...

  • Page 26: Computer Setting

    Change to the desired signal timing listed on page 57: COMPLIANT TIMING.  Windows XP/Vista/7/8/8.1/10 Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows /XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied.
  • Page 27  MULTI-TOUCH : This monitor complies with DDC2B of VESA standard. (Plug&play compliant) The MULTI-TOUCH function runs on Windows7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with the USB cable supplied.  TOUCH support operation system : Microsoft Windows 2000 (64 bit and 32 bit) Microsoft Windows XP (64 bit and 32 bit) Microsoft Windows Vista (64 bit and 32 bit) Microsoft Windows 7 (64 bit and 32 bit) Microsoft Windows 8/8.1/10 (64 bit and 32 bit) Mac OS X V10.6.4 & higher HID for single touch only Linux 3.0 &...

  • Page 28: Operating The Monitor

    OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 57. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 43 for SCREEN ADJUSTMENTS.
  • Page 29 Button when Menu is not displayed. Repeat successively to On/Off the function.  Kiosk Mode Function: Disable touch functions, buttons, Menu etc. Contact iiyama service center in case you want to enable kiosk mode. [LOCK MODE] * Available for Remote Control only.  Front Power Button: Press the Green Button when Menu is not displayed, will lock/unlock the Front Power Button.

  • Page 30: Adjustment Menu Contents

    ADJUSTMENT MENU CONTENTS You can also access the Menu by clicking on the desktop or on the navigation toolbar. Common settings Common settings Slot-PC iiWare HDMI1 HDMI2 HDMI3 Type-C Adjustment Item Problem / Option Button to Press Select the Slot PC input. Slot-PC* Select the iiWare input.
  • Page 31 Audio setting Audio Screen Display Adjust Volume Treble Balance Bass Mute Standard Meeting Class Custom Adjustment Item Problem / Option Button to Press Too soft Volume Direct Too loud Too weak Bass Too strong Too weak Treble Too strong Left side speaker louder Balance Right side speaker louder Standard...
  • Page 32 Screen setting Audio Screen Display Adjust Pixel Shift Eye care Auto Light Adjustment Item Problem / Option Button to Press Displays all picture in 4:3 aspect ratio. Displays all picture in 16:9 aspect ratio. Aspect ratio 16:9 Display the picture point to point. PTP * The screen image will move around slightly every 2 minutes.
  • Page 33 Display setting Audio Screen Display Adjust Brightness Contrast Sharpness Standard Bright Soft Custom Standard Cold Warm Adjustment Item Problem / Option Button to Press Too dark Brightness* Too bright Too dull Contrast Too intense Not available for this model. Sharpness Not available for this model.
  • Page 34 Adjust setting * Audio Screen Display Adjust H Position V Position Clock Phase AUTO Adjustment Item Problem / Option Button to Press Too far to the left H Position Too far to the right Too low V Position Too high Too narrow Clock Too wide...
  • Page 35 [Application] Settings  Click with the touch pen. Then, click with the touch pen. on the navigation toolbar  Status bar : Click to display the Common settings. : Click to display the Brightness. : Click to display the Volume. : Click to display the Ethernet settings.
  • Page 36 Settings ] Adjustment Item Problem / Option Button to Press Set the WiFi function On / Off and pairing to WiFi device. WiFi* Set the wired network. Ethernet Network : On / Off , Mac Adress, IP adress, Default gateway, Netmask, DNS, Proxy Wireless & networks Set the Hotspot function. Hotspot* Network : On/Off , SSID, Password, DHCP settings Bluetooth* Set the Bluetooth function On / Off and pairing to Bluetooth device. Set the VPN.
  • Page 37 Settings ] Adjustment Item Problem / Option Button to Press To display the internal system and USB disk. Storage Credential storage (Trusted Credentials, User Credentials), Security Install Form Storage, Clear Credentials, System Unknown sources* : On / Off System Check and update to latest FirmWare version. update WiFi, Hotspot and Bluetooth can only be used when Option WiFi Module or Slot-PC is installed. WiFi will be turned off when the Ethernet is turned on.
  • Page 38 Navigation toolbar appears  The navigation toolbar can be displayed on either left side or right side of the screen. : Back : Home : Back Stage Clean all : Remove all in-progress apps - Application - You can customize up to 7 apps from "All Apps" to the navigation bar. (Drag and drop the app icon) : Note : Finder : Settings : All Apps (Switch to PC, Browser, Cloud Drive, ESHARE Pro, Finder, Keeper, Note, Palette,...
  • Page 39 : ScreenShare Pro ScreenShare Pro is a multi-screen interaction software for smartphone to interactive intelligent panel. ScreenSharePro activation code included in optional WiFI Module OWM002/SI07. (The device such as a computer or smartphone on the same network.) Mirroring: It is an application that displays the screen of a device such as a computer or smartphone on the monitor.
  • Page 40 Shortcut  - App - Drag and drop the App icon from "All apps" to create a shortcut icon on the screen. - File / Folder - Drag and drop a File or Folder from the Finder to create a shortcut icon on the screen. - Website - Create a shortcut by opening the desired website and clicking "Send the quick-link to Desktop"...
  • Page 41 <How to use AirClass> The teacher click the AirClass. Use the device to scan the QR code. (device: Android and mobile device on the same network) The students can also join the class by entering the URL in browser. After all students have joined the class, click "ENTER THE CLASS". Answer 1.
  • Page 42 [Note] This is a writing software. Can write the characters, Lines and pictures like a whiteboard. Also, can insert an image or fi le. Click with the touch pen. - Tools - Menu: Display menu of Note. New: Save the Note writing and open a new Note. Open: Open the fi le. Save: Save the current document to image format to fi le browser. Import: Import the picture. (IMG/PDF/SVG) Export : Export as IMG/PDF/SVG/IWB. Cloud Storage: Google Drive / One Drive Save to Cloud Drive Users can save notes and annotations in Note directly to one of...
  • Page 43 : To the previous page. : To the next page. : Page number - Extension function of the pen - After selecting the handwriting, the handwriting can be turn to intelligent text and for further processing. Tools : Color, Smartwrite, Search, Flip, Top, Clone, Delete - Image expansion function - After selecting the image, the image can be transformed into vector image, and the image can be mirrored.
  • Page 44 [Finder (File Browser)] Click with the touch pen. Browse the fi les stored in the internal storage device, the USB storage, Cloud Drive and Remote File.  Supported Format DOC : PPT, Word, Excel, PDF (Open the fi le by using the WPS Offi ce) Note : Note fi les, screenshot Movie : .3g2 .3gp .avi .fl v .f4v .mkv .mov .mp4 .VOB .mpg/.MPEG .ts Picture : .jpg .jpeg .png .bmp .gif Music : .aac .ape .fl ac .m4a .mp3 .ogg .wav - Tools -...
  • Page 45 Cloud Drive (Google Drive / One Drive) Save to Cloud Drive Users can save notes and annotations in Note directly to one of the cloud drives by clicking on the Cloud Storage icon in the menu. To change the way files are saved to the Cloud Drive, users can select two options in the cloud storage overview.
  • Page 46 [Browser (Web Browser)] Connect the network, and browse the web. Click with the touch pen. [Cloud Drive] Connect the network, and the Cloud Drive. Click with the touch pen. [ESHARE Pro] EShare is a multiscreen interaction application which makes the user experience natural and enjoyable for home entertainment, business presentation, and educational training.

  • Page 47: Screen Adjustments

    Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is changed. If the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by using the screen adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama.com). Adjust the image by following the procedure below to get the desired picture. This manual explains adjustment under Windows OS.
  • Page 48 Perform the Auto Adjustment. Adjust the image manually by following procedure below when the screen has a flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. Adjust the V Position so that the top and bottom of the picture frame will fit to the display area.
  • Page 49 Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. NOTE  In case the strong flicker or blurs remain on a part of the screen, repeat steps because the Clock may not be adjusted correctly.  Adjust the H Position after the Phase adjustment if the horizontal position moves during the adjustment. Adjust the Brightness and Color to get the desired picture after you complete the Clock and Phase adjustments.

  • Page 50: Standby Feature

    STANDBY FEATURE ® The standby feature of this product complies with power saving requirement of ENERGY STAR and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a standby step the monitor takes as described below.

  • Page 51: Trouble Shooting

    MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance. Problem...

  • Page 52: Recycling Information

    The touch position  The calibration function set up correctly. does not deviate. RECYCLING INFORMATION For better environment protection please don't dispose your monitor. Please visit our web site: www.iiyama.com for monitor recycling. 48 TROUBLE SHOOTING / RECYCLING INFORMATION...

  • Page 53: Appendix

    APPENDIX Design and specifications are subject to change without prior notice. SPECIFICATIONS : ProLite TE8604MIS Technology IR Touch 20points Light transmission Hardness Touch Thickness Screen Communication USB serial transfer system Response time 10ms Size Category 86" Panel technology Size Diagonal: 85.6" (217.427cm) Pixel pitch 0.4935mm H × 0.4935mm V Brightness 350cd/m (Typical) Panel Contrast ratio...
  • Page 54 Speakers Internal: 2 Typical: 16W (Stereo speakers) iiWare Version V9.0 Maximum Screen Size 1895.00mm W × 1065.96mm H / 74.6" W × 42.0" H Power Source 100-240VAC, 50/60Hz, 7.0A Power Consumption* 390W typical, Standby mode: 0.5W maximum 1957.0 × 1159.5 × 86.0mm / 77.0 × 45.6 × 3.4" (W×H×D) Dimensions / Net Weight 64.4kg / 142.0lbs Operating: Temperature 0 to 40°C / 32 to 104°F Humidity 10 to 90% (No condensation) Environmental Considerations...

  • Page 55: Specifications : Prolite Te7504Mis

    SPECIFICATIONS : ProLite TE7504MIS Technology IR Touch 20points Light transmission Hardness Touch Thickness Screen Communication USB serial transfer system Response time 10ms Size Category 75" Panel technology Size Diagonal: 74.52" (189.273cm) Pixel pitch 0.4296mm H × 0.4296mm V Brightness 350cd/m (Typical) Panel Contrast ratio 1200 : 1 (Typical: without glass) Viewable angle Horizontal : 178 degrees, Vertical: 178 degrees (Typical) Response time 8ms (Typical, Gray to Gray)
  • Page 56 Speakers Internal: 2 Typical: 16W (Stereo speakers) iiWare Version V9.0 Maximum Screen Size 1650.0mm W × 928.0mm H / 65.0" W × 36.5" H Power Source 100-240VAC, 50/60Hz, 5.5A Power Consumption* 260W typical, Standby mode: 0.5W maximum 1709.0 × 1020.0 × 86.0mm / 67.3 × 40.2 × 3.4" (W×H×D) Dimensions / Net Weight 50.8kg / 112.0lbs Operating: Temperature 0 to 40°C / 32 to 104°F Environmental Humidity 10 to 90% (No condensation) Considerations...

  • Page 57: Specifications : Prolite Te6504Mis

    SPECIFICATIONS : ProLite TE6504MIS Technology IR Touch 20points Light transmission Hardness Touch Thickness Screen Communication USB serial transfer system Response time 10ms Size Category 65" Panel technology Size Diagonal: 64.5" (163.896cm) Pixel pitch 0.372mm H × 0.372mm V Brightness 350cd/m (Typical) Panel Contrast ratio 1200 : 1 (Typical: without glass) Viewable angle Horizontal : 178 degrees, Vertical: 178 degrees (Typical) Response time 8ms (Typical, Gray to Gray)
  • Page 58 Speakers Internal: 2 Typical: 16W (Stereo speakers) iiWare Version V9.0 Maximum Screen Size 1428.5mm W × 803.5mm H / 56.2" W × 31.6" H Power Source 100-240VAC, 50/60Hz, 4.5A Power Consumption* 190W typical, Standby mode: 0.5W maximum 1488.5 × 896.5 × 85.5mm / 58.6 × 35.3 × 3.4" (W×H×D) Dimensions / Net Weight 38.0kg / 83.8lbs Operating: Temperature 0 to 40°C / 32 to 104°F Environmental Humidity 10 to 90% (No condensation) Considerations...

  • Page 59: Dimensions : Prolite Te8604Mis

    DIMENSIONS : ProLite TE8604MIS 1149.5mm/45.3” 4xM8 SCREW HOLE 1957.0mm/77.0” (VESA MOUNT) 1925.5mm/75.8” 800.0mm/31.5” DIMENSIONS : ProLite TE7504MIS 1149.5mm/45.3” 4xM8 SCREW HOLE 1709.5mm/67.3” (VESA MOUNT) 1678.0mm/66.1” 800.0mm/31.5” APPENDIX 55...

  • Page 60: Dimensions : Prolite Te6504Mis

    DIMENSIONS : ProLite TE6504MIS 937.5mm/36.9” 4xM8 SCREW HOLE 1488.5mm/58.6” (VESA MOUNT) 1457.0mm/57.4” 600.0mm/23.6” 56 APPENDIX...

  • Page 61: Compliant Timing

    COMPLIANT TIMING Timing VGA 640x480 31.5 60.0 25.175 SVGA 800x600 37.9 60.0 40.000 XGA 1024x768 48.4 60.0 65.000 WXGA 1280x768 47.8 60.0 79.500 QVGA 1280x960 60.0 60.0 108.000 SXGA 1280x1024 64.0 60.0 108.000 VESA HD FWXGA 1366x768 47.7 60.0 85.500 CVT 1400x900 55.9 60.0...

This manual is also suitable for:

Prolite te7504misProlite te6504mis

Table of Contents