Table of Contents
Advertisement
Mode
Power cycle
Factory reset
Firmware upgrade
Charging States
Mode description
Charging
The battery pack is plugged in and
charging.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A...
Description
The camera is being power cycled.
To enter this mode, press and hold
the button for 61-75 seconds.
The camera resetting to factory
default. To enter this mode, press
and hold the button for 76-180
seconds.
The camera's firmware is being
upgraded.
Top LED Behavior
Solid orange
Button LED behavior
Blinking yellow
Alternating red and green
Blinking yellow rapidly
Button LED behavior
On button press
Solid green =
>75% charged
Solid yellow =
75%-20% charged
Alternating red and blue = <20%
charged
Updated: Wed, 30 Aug 2023 11:32:17 GMT
17
Advertisement
Table of Contents
Need help?
Do you have a question about the ADC-VDB780 and is the answer not in the manual?