Alarm.Com ADC-VDB780 Installation Manual page 16

Button light guide
Operational States
Mode
Standby or off
Local connection
No local connection
Low battery
Connecting to network
WPS mode
AP mode
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A...
Description
The camera is in standby mode
(normal operation) or the battery is
drained and requires recharging.
The camera has a local network
connection.
The camera does not have a local
network connection.
The camera's battery is low and
requires a recharge.
The camera is powered on and
connecting to the network.
The camera is in WPS pairing mode.
To enter this mode, press and hold
the button for 30-45 seconds.
The camera is in AP pairing mode.
To enter this mode, press and hold
the button for 46-60 seconds.
Button LED behavior
Off
Solid green
Solid red
Alternating red and blue
Blinking red
Blinking blue
Blinking white
Updated: Wed, 30 Aug 2023 11:32:17 GMT
16