Table of Contents
Advertisement
Prepare the cavity
Installing Your Dishwasher
Cold water connection
The Inlet Hose supplied requires a
washer.
A faucet is important for isolating the supply to the dishwasher.
Ensure that the sealing washer supplied inside the hose connection is firmly in place.
Check that the initial water is clean, particularly if the supply has not been used for
some time.
Dishwasher must be level for proper dish rack
operation and wash performance.
If need be, adjust the feet in each corner to
ensure the product sits evenly on the floor,
Spirit level
and is level both left to right and front to back.
This can be checked by using a spirit level on an
open drawer.
3/4
inch BSP Male fitting, suitable for a flat sealing
3/4 BSP thread
Rubber sealing washer
Drainage pipe
30
Inlet pipe
Power cable
Advertisement
Table of Contents
