Table of Contents
Advertisement
Before Installation
Parts supplied
Mounting brackets (4)
(for drain hose coupling)
Screws (8)
Prepare the cavity
The cavity will need to conform to the dimensions in the diagram.
The water supply and power point for the appliance cannot be in the dishwasher cavity.
Ideally they should be in an adjacent cavity, easily accessed for isolating the product.
An opening to allow the hoses and power cord to exit is required on either side of the
cavity with the minimum dimensions shown.
Unit: mm
Ensure that the inner end of
the tab is protruding by one
material thickness
Moisture protection tape (1)
Power plug
Water tap
Opening 60*80
29
Drainage
interface
Advertisement
Table of Contents
