Page 2
REMOTE CONTROL TRANSMITTER INFRARED EMITTER LIGHT BUTTON TURBO BUTTON CHANNEL SELECTOR FORWARD/BACKWARD/ LEFT TURN/RIGHT TURN THROTTLE POWER SWITCH TRIM KNOB BATTERY INSTALLATION • Unscrew cover and install 6x AA Batteries as shown. • Please note polarity and orientation of batteries. PREFLIGHT CONDITIONS •...
Page 3
HELICOPTER TAKEOFF 1: Place Helicopter on a flat surface. Turn on the Transmitter and the Helicopter 2: Check surroundings to be sure that it is clear of people, animals, and obstructions. 3: Slowly push the Throttle Stick up to increase blade speed for lift. 4: Adjust throttle input to maintain a steady hover.
Page 4
ADJUSTMENTS If the Helicopter spins to the left or right in flight without your input, you will need to adjust the trim. Helicopter spins to the left. Helicopter spins to the right. Slowly twist the trim knob to Slowly twist the trim knob to the right until the helicopter the left until the helicopter stops spinning.
Page 5
ATTENTION - Install only new batteries of the same type in your product. - Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak. - Do not mix old and new batteries.
Need help?
Do you have a question about the 35939 and is the answer not in the manual?
Questions and answers