Page 1
CROSSBOW IN STRUC TI O N MA N UA L DART BLASTER OVERVIEW: SIGHT PULL BACK SLIDE FIXED STOCK BATTERY COMPARTMENT 4 FIRING DART CHAMBERS ITEM NO. 33805...
Page 2
DA RT BL A ST E R A S S EM BLY To assemble dart blaster, insert bow pieces into main body of blaster by pushing down on release slide (1.) and lining up tabs with body as you push pieces in until secure (2.) for both sides. Thread bow string through one side of bow as shown (3.) and thread through both parts of blasters pull slide (4.) and tie off on opposite end (5.).
Page 3
LOAD IN G DART BLA S T ER Load 4 darts into the blaster as shown. To avoid damage to darts and/or blaster, do not force dart all the way in. About 1/4 of dart should stick out of barrel. Each chamber will fire in succession from top to bottom.
Page 4
T ROU BL E S H OOT IN G DA RT B LAS T E R PROBLEM CAUSE SOLUTION Blaster does not fire. Blaster barrel is empty. Load blaster with darts. Pull back on slide until a click is Blasters pull back slide was not heard.
Need help?
Do you have a question about the 33805 and is the answer not in the manual?
Questions and answers