DeWalt LaserChalkLine DW088CG Instruction Manual page 4

ENGLISH
Laser Information
The DW088 LaserChalkLine™ Laser Line Generators are Class II (2) laser products and comply with 21 CFR 1040.10 and 1040.11
except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.
Introduction
The DW088 lasers are self-leveling laser tools that can be used inside and outside for horizontal (level), vertical, and plumb
alignment projects.
General Safety Rules For Battery Operated Tools
WARNING! Read and understand all instructions. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
WORK AREA
Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
•
Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Use battery operated tool only with the specifically designed batteries. Use of any other batteries may create a risk of fire.
•
Battery
This tool is powered by three 1.5V AA size batteries.
2