Table of Contents
Advertisement
Switching on the appliance for the first time
When the dishwasher is switched on for
the first time, you are taken directly to
the settings for switching on the
appliance for the first time. The following
text is indicated on the display window
at the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
The required settings for switching on
the appliance for the first time are listed
in the table below.
Settings
Switching on the
appliance for the first
time
Language
Time format
Time setting
Rinse aid disp.
--------
Factory setting
English
24h
12:00
Setting 5
Getting to know your appliance aus
Change the setting as follows:
Keep pressing button > )" until the
1.
required setting is displayed.
Make the setting with setting buttons
2.
+ - P.
Press and hold the Info button {
3.
8 for 3 seconds.
The chosen setting has now been
stored.
Infotext
by pressing Info button {
Language selection.
12h or 24h.
Set the current time.
Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
13
Advertisement
Table of Contents
