Table of Contents
Advertisement
aus Installation and connection
Transporting
Empty the dishwasher and secure loose
parts.
Drain the appliance according
to the following steps:
Turn on the tap.
1.
Open the door.
2.
Switch on ON/OFF switch (.
3.
Select programme with the highest
4.
temperature.
The estimated programme duration
is indicated on the display window at
the top @.
Press START button h.
5.
Close the door.
6.
Programme sequence starts.
Open the door after
7.
approx. 4 minutes.
Press START button h until
8.
"Program was terminated"/"Ready in
one minute." is indicated at the top
of the display window @.
Close the door.
9.
Open the door after approx. 1
10.
minute.
The display window at the top @
indicates; "Finished".
Switch off ON/OFF switch (.
11.
Turn off the tap, disconnect supply
12.
hose and drain water.
Note: Transport appliance upright only.
This prevents residual water from
running into the machine control
and damaging the programme
sequence.
50
Protection against frost
I f the appliance is in a room where
P r o t e c t i o n a g a i n s t f r o s t ( E m p t y i n g t h e a p p l i a n c e )
there is a risk of frost (e.g. holiday
home), empty the appliance completely
(see Transportation).
Advertisement
Table of Contents
