Table of Contents
Advertisement
Switching on the appliance for the first time
When the dishwasher is switched on for
the first time, you are taken directly to
the settings for switching on the
appliance for the first time. The following
text is indicated on the display window
at the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
The required settings for switching on
the appliance for the first time are listed
in the table below.
Settings
Switching on the
appliance for the first
time
Language
Time format
Time setting
Water hardness
Rinse aid disp.
Water connection *
* depending on the features of your dishwasher
--------
Factory setting
Deutsch
24h
12:00
°E 16 - 20 medium
Setting 5
Cold water
Getting to know your appliance en
Change the setting as follows:
Keep pressing button > )* until the
1.
required setting is displayed.
Make the setting with setting buttons
2.
+ - X.
Press and hold the Info button {
3.
8 for 3 seconds.
The chosen setting has now been
stored.
Infotext
by pressing Info button {
Language selection.
12h or 24h.
Set the current time.
Setting water hardness. When using
Multitabs, select the lowest setting.
Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Connection to hot water (40-60°C) or cold
water (<40°C) possible.
13
Advertisement
Table of Contents
