Quick Setting Area For The Auto-Tracking - Datavideo PTC-305NDI Instruction Manual

11. Quick Setting Area for the Auto-Tracking

The quick setting area of the Auto-Tracking function is located below the PTZ
control area for you to turn on or turn off the Auto-Tracking function rapidly.
Moreover, it also allows you to select the "Presenter" or "Zone" tracking
mode from the drop-down menu. You can also turn on or turn off the "Debug
Mode". If the "Debug Mode" is turned on, there is a green frame that will
appear when the Auto-Tracking function is activated. If the "Debug Mode" is
turned off, the green frame will not be shown. The interface of the Auto-
Tracking quick setting area is shown in the following diagram.
91