HP A6829A User's Manual And Service Manual page 92

Troubleshooting
Setting and Confirming SCSI Parameters
Displaying SCSI IDs
To display the initiator SCSI IDs for an adapter using the SCSI
command, use the following syntax:
SCSI init bus_number slot_number
where
bus_number
slot_number
For example:
•
•
78
Specifies the number of the bus on which the adapter is
installed.
Specifies the number of the slot the adapter is in.
To display the SCSI ID for an adapter on bus 5 slot 2, issue the
following command:
SCSI init 5 2
The command displays the following output:
PCI device /5.2 = 7
To list the SCSI IDs for all the bus and slot numbers, issue the
following command:
SCSI init
Get other manuals https://www.bkmanuals.com
Chapter 3