Maintenance - Tarmo TAR150 Instruction Manual

TRANSPORTATION
Preparations for transport:
- Raise the machine to transport position (at least 150 mm above the ground) using the
winch.
- Make sure the machine will not be detached from the winch hook or the bottom plate when
in transport position.
- It is forbidden to use the snow blower during transportation.

MAINTENANCE

- It is forbidden to carry out repairs underneath a raised and not secured machine against
accidental lowering of machine or its components.
- Check regularly nuts and bolts for their fixed position and tighten if necessary.
- Use appropriate tools and gloves during parts replacement.
- Carefully remove the oil and grease from machine surfaces.
- Unplug the supply of electricity before any electrical or welding works and works on elec-
trical system of the ATV/machine.
- Protective devices are subject to wear and have to be regularly adjusted, controlled and
replaced at the right time.
- Spare parts must correspond at least to these specified by the manufacturer technical re-
quirements. These shall be such as the original spare parts.
What?
Bolts and nuts
Engine oil
V-belts
Electric wires
Skid shoes
When?
Before each use
Before each use
Before each use
Before each use
Before each use
How?
Check the tightness.
Check the oil level and add oil, if necessary.
Change the engine oil at least once a year (1,1 L
5W-30).
Check the tightness and adjust, if necessary
(Fig. 15). If the belts have cracks or they are
worn, they must be replaced.
Check the condition. If the wire cover is dam-
aged or the wire has some visible damages, the
wire must be replaced.
Check the condition and tightness of bolts.
30