Page 2
FLC Amps Input W RIL-100 High 2200 0.11 RIL-100 Low 1850 0.10 RIL-125 High 2250 0.13 RIL-125 Low 1900 0.10 General 1.1. It is important that these Installation and Maintenance Instructions are fully adhered to. 1.2. All electrical installations must be carried out by a suitably qualified and competent personnel in accordance with all statutory requirements.
Page 3
2.3. Means for electrical disconnection must be incorporated in the wiring installation in accordance with the relevant wiring regulations. 2.4. Remove the fan body from the spigots that are attached to the base, by releasing the two retaining clamps RIL-100 / RIL-125. Page 3 of 4...
Page 5
Installation (cont)... 2.5. Mount the base in the desired position using the fasteners supplied. 2.6. Replace the fan body in-between the spigots and tighten the two retaining clamps or clamp screws. Fan Maintenance 3.1. Inspect the fan at least once every 12 months to ensure that the motor and fan blades are clean.
Page 6
This product is not intended for use by persons (including children) Specification with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
Page 7
Installation (cont)... 2.5. Mount the base in the desired position using the fasteners supplied. 2.6. Replace the fan body in-between the spigots and tighten the two retaining clamps. Fan Maintenance 3.1. Inspect the fan at least once every 12 months to ensure that the motor and fan blades are clean.
Page 8
This product is not intended for use by persons (including children) Specification with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety.
Need help?
Do you have a question about the RIL-125 and is the answer not in the manual?
Questions and answers