Advertisement
Quick Links
Installation (cont)...
2.5. Mount the base in the desired position using the fasteners supplied.
2.6. Replace the fan body in-between the spigots and tighten the two
retaining clamps.
Fan Maintenance
3.1. Inspect the fan at least once every 12 months to ensure that the motor
and fan blades are clean. Any build up of dust should be removed
using a non-abrasive cleaner.
3.2. All fastenings should be checked for tightness.
3.3. Bearings are of the 'sealed for life' type and will not need a detailed
inspection.
Wiring Diagram
Please note that the ProVent with run-on timer (models RIL-150T and RIL-200T is single speed only,
is not suitable for speed control and does not come with a plug and lead.
Part No: INST-RIL-T
11/12
In-Line
Duct Mounted Fan
RIL-150T
RIL-200T
INSTALLATION & MAINTENANCE
INSTRUCTIONS
Advertisement
Related Manuals for Fantech RIL-150T
Summary of Contents for Fantech RIL-150T
- Page 1 Wiring Diagram In-Line Duct Mounted Fan Please note that the ProVent with run-on timer (models RIL-150T and RIL-200T is single speed only, is not suitable for speed control and does not come with a plug and lead. RIL-150T RIL-200T INSTALLATION &...
- Page 2 2.4. Remove the fan body from the spigots that are attached to the base by RIL-200T 2500 0.50 releasing the two retaining clamps (RIL-150T, see diagram), or the two clamp screws (RIL-200T). General 1.1. It is important that these Installation and Maintenance Instructions are fully adhered to.
Need help?
Do you have a question about the RIL-150T and is the answer not in the manual?
Questions and answers