ProScan PA1271 - 12" Light Up Bluetooth Speaker-FM Radio Manual

ProScan PA1271 - 12" Light Up Bluetooth Speaker-FM Radio Manual

Advertisement

ProScan PA1271 - 12" Light Up Bluetooth Speaker-FM Radio Manual

Packing list

NOTE
This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.

Upon opening the package, please check for the following items:

  • 1 x Speaker
  • 1 x Charging cable
  • 1 x Instruction manual

Do's and Don'ts

  • Do not play music at excessive levels as damage to hearing and / or equipment may result.
  • Do not use outdoors in wet or in damp surroundings.

Specification

Output Power 20W
Frequency Response 55Hz-20KHz
SNR ≥75dB
THD ≤10%
Battery 3000MAh 3.7V (18650) rechargeable battery
DC input 5V/1A
Loudspeake 12inch x 1
FM 87.5~108.0 MHz
Transmission Distance 10m
Dimension: (WxHxD) 355 X 440 X 240mm

Product overview

Product overview

  1. LED Display
  2. Power(OFF/ON)/VOLUME -&+
  3. MIC input
  4. AUX input
  5. TF Card
  6. USB JACK
  7. MODE/LED ON(Long press to turn on/off light; Lightly press to enter into selection for Bluetooth, FM Radio, AUX Input, USB and TF card.)
  8. Previous track
  9. Play/Pause&TWS (Wirless Bluetooth Connection: under bluetooth mode, press TWS button for around 3 seconds to pairing another TWS speaker; Under FM mode, lightly press Play/Pause&TWS to enter into automatic scan and all the scanned radio stations will be saved automatically.)
  10. Next track / Under Bluetooth mode, long press this button that will go to singing mode, press again that will go back normal.
  11. MIC.VOL:Microphone volume control
  12. Echo volume
  13. DC interface (5V)
  14. Charging Status RED=Charging Light off = Fully Charged

Function

  • POWER SOURCE
  1. Please charge the unit at least 4 hours before first time using.
  2. Twist the dial clockwise/anticlockwise to switch on/off the unit.
  • CHARGE THE BATTERY
    When the battery is charging, the CHARGE STATUS lights shows on the LED display is red. After the battery has fully charged, the light turns off.
  1. Connect the USB charge cable to the DC5V interface of the speaker firmly.
  2. When the battery is fully charged, please disconnect the USB charge cable from the speaker.
  3. The speaker works normally when charging.
  • POWER/VOLUME
    Twist the dial clockwise/anticlockwise to increase/discrease the volume.
  • PREVIOUS/NEXT BUTTON
    Under playing status, press PREVIOUS/NEXT button to get back to a previous or next song.
  • PAUSE/PLAY BUTTON
    To pause the current track, please press PAUSE/PLAY button on the control panel. Press it once again to continue playing.
  • MODE/LED ON
    Long press to turn on/off light.
    Lightly press to enter into playing mode selection(Bluetooth, FM Radio, AUX Input, USB and TF card).
  • AUX IN JACK
  1. Connect an audio cable to the AUX IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman, etc, then select AUX by pressing the MODE/LED ON button on the control panel.
  2. Play from an external audio device.
  • MIC IN JACK
    Plug in microphone directly for playing.
  • USB/TF JACK
    Insert USB/TF card directly for playing.
  • FM FUNCTION
    Lightly press MODE/LED ON button to switch to FM mode, Short press PLAY/PAUSE button on control panel for automatic searching and saving the radio stations, by pressing PREVIOUS or NEXT you can select a previous or next radio station.
  • Bluetooth:
    Short press MODE/LED ON button on control panel to select Bluetooth mode.
    Simultaneously open the Bluetooth setting on your phone, tablet or any other bluetooth enabled audio device and select "Pro PA1271"(no need to match code), the unit and device will then connected via Bluetooth. Press the "NEXT SONG" and "PREVIOUS SONG" button on the control panel to select the song, press " PLAY/PAUSE" button to control the playing status.
    TWS pairing:
  1. It needs two same units and both are under Bluetooth mode.
  2. Long press the TWS botton from either of both units
  3. The display shows 't on' that means the TWS functions is on.
  4. Both units will pair together, after that turn on the Bluetooth devices and select Pro PA1271 to pair it.
  5. You can play the songs from the Bluetooth devices now.
  6. Long press this button again that will show 't of', it means this TWS function will turn off and both speakers will be disconnected.

PROSCAN TM IS A REGISTERED TRADEMARK OF TECHNICOLOR USA INC. AND USED UNDER LICENSE TO CURTIS INTERNATIONAL LTD.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download ProScan PA1271 - 12" Light Up Bluetooth Speaker-FM Radio Manual

Advertisement

Need help?

Need help?

Do you have a question about the PA1271 and is the answer not in the manual?

Questions and answers

Table of Contents