Care And Maintenance - LEITZ 2415112UK Manual

CARE & MAINTENANCE
Accessing the filter chamber
1. Always power off the purifier by pressing the Power
Button and unplugging the power cord.
2. Gently place the unit on its side on the floor so that
the filter chamber cover and knob are exposed.
3. Turn the knob counter-clockwise and remove the
filter cover and 360° filter drum (Fig. A).
REPLACING PARTICULATE AIR FILTER
1. The HEPA indicator will glow red when it is time to
change the entire drum filter.
2. Gently pull the drum filter away from its place
secured to the filter cover (Fig. B).
3. Secure the replacement filter onto the filter cover
(Fig. C).
4. Gently replace the filter cover with filter drum into
the filter chamber and onto the threading, and turn
the knob clockwise until the knob and filter chamber
cover are securely tightened (Fig. D).
5. Plug-in and power on your purifier, and hold the
Reset button until the red HEPA indicator turns off.
Note: Particulate air drum filter (on page 10) will include 2 layers:
Carbon Prefilter and particulate layer
Fig. A
Fig. B
Fig. C
Fig. D
11