(Hotsync) Is Not; Operation Via A Wireless Lan; Operation - Sony CLIE PEG-TH55 Frequently Asked Questions Manual

HotSync Manager does not start.
displayed in the task tray (Notification area) at the
bottom right of my computer window
B Reinstall Palm™ Desktop for CLIÉ.
I cannot perform a HotSync
LAN
®
B If a HotSync
displayed in [Primary PC Name:] in the Primary PC Setup screen, which
can be displayed by tapping [Primary PC Setup...] form [Options] in the
menu of the HotSync screen.
You need to delete this name the next time you perform the wireless LAN
®
HotSync

operation.

Tips
• If you enter "!!" as [Primary PC Name:], you do not need to delete the name every time you
perform the wireless LAN HotSync
• To perform a HotSync
connection via a wireless LAN properly. Check the connection according to "I cannot
connect to the Internet via a wireless LAN" on page 32.
If you still cannot perform the HotSync
If you cannot solve your HotSync
troubleshooting tips in this manual, follow the procedure below.
Check if any "Unknown device" is listed in the Device
Manager on your computer.
Note
This "Unknown device" may appear in the Device Manager only while your CLIÉ
handheld tries to connect to your computer. After your CLIÉ handheld has timed out and
displayed an error message on a window, it disconnects from your computer and this
"Unknown device", if it was present, will disappear and you will not see it.
1
Right-click [My Computer] and select [Properties] from the
menu.
The System Properties window is displayed.
26
operation is performed once, your computer's name is
®
operation.
®
operation using the wireless LAN function, you need to set up the

(HotSync) is not

®
operation via a wireless
®
operation problem by following the
®
operation