An Error Message Is Displayed Indicating Insufficient Memory - Sony CLIE PEG-TH55 Frequently Asked Questions Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I cannot beam data
Verify the following first
B Select [General] in the Preferences screen and check that [Beam
Receive:] is set to [On].
B Make sure you point the IR port of your CLIÉ handheld directly at the IR
port of the target device.
B Make sure the distance between your CLIÉ handheld and the target device
is 4 to 8 inches (approximately 10 to 20 centimeters). The optimum distance
for beaming may vary depending on devices.
B Sometimes file contents may be accidentally linked to the name of another
file when you transfer many files at the same time using the IR port. Transfer
files one by one when using the IR port.
An error message is displayed indicating insufficient
memory when I receive data/files via beaming
B To receive data/files using the IR port, the free space in your CLIÉ
handheld's memory must be more than twice the size of data/files to be
received. If there is insufficient memory space in your CLIÉ handheld,
delete any unnecessary data/files.
B Perform a soft reset by pressing the RESET button of your CLIÉ handheld.
b
For details, refer to "Basic operations of your CLIÉ
™
CLIÉ handheld" in the supplied "Read This First (Operating Instructions)".
30
™
handheld: Restarting your