Page 2
The following manuals are included with your CLIÉ handheld. Printed manual Read This First (Operating Instructions), this manual* Explains how to set up your CLIÉ handheld and computer, and basic operations. For safe use, make sure you read the supplied “Safety & Regulations Guide”.
• In no event will SONY be liable for any financial damage or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this product.
Table of Contents Setting up your CLIÉ™ handheld Confirming the package contents ....6 Setting up your CLIÉ™ handheld ..8 Step 1: Charging your CLIÉ...
Page 5
LCD and do not indicate a malfunction. Please note that Sony does not guarantee a replacement or refund for such cases. Do not expose the LCD or camera lens to direct sunlight for prolonged periods of time. It may result in a malfunction.
Setting up your CLIÉ™ handheld This chapter explains how to charge your CLIÉ handheld, perform the initial setup, and use it with your computer. Confirming the package contents Please confirm that all the following accessories are included in the package before setting up your CLIÉ...
PDF file on the Installation CD-ROM. Make sure that the package contains all of the above contents. If any item is missing, contact the Sony Customer Information Service Center or a Sony dealer. Use the strap to avoid dropping your CLIÉ handheld...
Setting up your CLIÉ™ handheld Perform the following before setting up your CLIÉ handheld. Step 1: Charging your CLIÉ handheld Before using your CLIÉ handheld for the first time, make sure you fully charge the battery. Connect the AC power adapter to the DC IN connector of the plug adapter.
Note If the battery of your CLIÉ handheld is completely discharged, all user data stored on your CLIÉ handheld will be lost. How to remove the plug adapter Remove by pressing the plug adapter on both sides as illustrated. Step 2: Performing the initial setup after turning on your CLIÉ...
Page 10
Tips If you cannot turn on your CLIÉ handheld • Did you charge your CLIÉ handheld as described on page 8? For details, refer to “Frequently Asked Questions: I cannot turn on my CLIÉ handheld” on page 67. • Perform a soft reset if you cannot turn on your CLIÉ handheld even after charging it (page 47).
Page 11
Following the on-screen instructions, tap exactly in the center of the displayed mark. Tap the next targets, which are displayed at the bottom right and then in the center of the screen. The display in the screen depends on where you purchased your CLIÉ handheld. Note If the stylus digitizer is not configured correctly, the scroll bar may not operate properly, “tapping”...
Page 12
Click [Yes] to confirm. (Only available for certain models or areas.) Tap the box next to [Set Time:]. The Set Time dialog box is displayed. You can reconfigure the date and time settings in the Preferences screen. For details, refer to “Customizing your CLIÉ™...
Page 13
Tap the box next to [Set Date:]. The Set Date screen is displayed. Tap b or B to select the current year. Tap the current month, then tap the current date. The Set Date screen closes. Tap the box next to [Time Zone:]. The Set Time Zone screen is displayed.
Page 14
Tap the region to set the time zone, then tap [OK]. Tap V next to [Daylight Saving:] and select [On] or [Off]. Tap [Next].
Page 15
The holiday information should be used for guidelines only, it is not available for some countries or regions, and it may differ by areas or it could change in the future. This information is not intended for business or official use. Sony assumes no liability arising from the use of these data.
Page 16
Tap [Yes]. The Home screen (CLIE Organizer) is displayed. The screen displayed when you turn on your CLIÉ handheld and tap the Home screen. For details on the Home screen, refer to “Using an application: Displaying the Home screen” on page 27. The initial setup is complete.
Using your CLIÉ™ handheld with your computer CLIE Organizer for PC and Palm™ Desktop for CLIÉ stored on the supplied Installation CD-ROM must be installed on your computer. The software is used for data transfer between your CLIÉ handheld and computer, and handling data on your computer such as Address Book.
Step 1: Installing Palm™ Desktop for CLIÉ on your computer Palm™ Desktop for CLIÉ is the software supplied with the Palm OS device. You can synchronize data between your CLIÉ handheld and computer using Palm™ Desktop for CLIÉ. Make sure you install this before installing CLIE Organizer for PC (page 23).
Page 19
InstallShield Wizard window when the installation is complete. Click [Finish]. The Sony CLIÉ Handheld Registration window is displayed for models for the U.S.A., Canada, and Europe only. If you do not want to sign up for the customer service, click [Register your CLIÉ].
You can register your CLIÉ handheld by following the on-screen instructions. With your permission, Sony will keep you informed of special opportunities. Also, your registration information helps Sony assist you if you call for customer support. All of the information you provide is confidential.
Page 21
Connect the mini “B” plug of the USB cable to the plug adapter (1), then connect the plug adapter to the interface connector of your CLIÉ handheld (2). Connect the “A” plug of the USB cable to the USB port of your computer.
Step 4: Entering a user name for your CLIÉ handheld Tap [Applica…] from the Home screen of your CLIÉ handheld. The Applications screen is displayed. (HotSync) in the Applications screen. The HotSync screen is displayed. (HotSync) in the HotSync screen. The HotSync software starts automatically.
Click [OK] when your user name is displayed in the Users window of your computer. A beep is heard from your CLIÉ handheld and the HotSync starts. Your user name entered for CLIE Organizer for PC is also registered in your CLIÉ...
Page 24
Click [Install]. Installation of CLIE Organizer for PC starts. “InstallShield Wizard Complete” message is displayed in the InstallShield Wizard window when the installation is complete. Click [Finish]. The Image Converter window is displayed. Image Converter is required to be installed to use CLIE Organizer for PC. Follow the on- screen instructions.
Installing the supplied applications on your CLIÉ™ handheld You can install applications from the supplied Installation CD-ROM by following the procedure below. You must install CLIE Organizer for PC (or Palm™ Desktop for CLIE) on your computer, before installing the supplied applications on your CLIÉ handheld.
Basic operations of your CLIÉ™ handheld This chapter explains how to turn on/off your CLIÉ handheld, start an application, enter text, synchronize with your computer, take a picture, and perform a reset. Turning on/off your CLIÉ™ handheld Turning on your CLIÉ handheld Slide down the POWER/HOLD switch.
Using an application To use your CLIÉ handheld, you need to start an application. The following explains how to start an application from the Home screen (CLIE Organizer). Displaying the Home screen What is the Home screen? The screen displayed when you turn on your CLIÉ handheld and tap (Home) is called the Home screen.
Starting an application from CLIE Organizer What is CLIE Organizer? CLIE Organizer is an essential application that manages all applications installed on your CLIÉ handheld. You can start an application from the application tabs which include Date Book, Address Book, To Do List, Free Notes, Memo Pad, Viewer, Reference, and Applications.
• Memo Pad You can take text format memos. Text files created on your computer can also be read. • Viewer You can display the list of pictures, movie files, voice memos, and Free Notes memos. You can also tap the files to view or play. •...
Quitting the application You do not need to save data manually on your CLIÉ handheld as you do on a computer, although some applications require data be saved. For details, refer to the “CLIÉ Application Manual” (HTML format). To switch from one application to another, perform either of the following methods.
Page 31
Press the BACK button when the Home screen is displayed. The current application is selected. Press Rotate the Jog Dial™ navigator to select an application to start. An application is selected. Rotate up or down Press the Jog Dial™ navigator. The selected application starts.
Page 32
To select an application by category at the top right of the Applications screen to select the category you want. Pressing the application buttons You can also start the applications by pressing the application buttons. The default setting of the application buttons are: Date Book, Tips •...
Entering text ® Using Graffiti 2 writing to enter text ® Graffiti 2 is a unique writing method for quickly and easily entering text into CLIÉ applications. Text is entered in the Graffiti supplied stylus. Graffiti converts it to typed text. Using the Graffiti CLIÉ...
Page 34
Entering text You need to start an application and display the screen in which you want to enter text. Follow the steps below to enter text. Start an application, such as Date Book, in which you want to enter text. Tap a line for the insertion point where text is to be entered.
Other ways to enter text There are some other ways to enter text into your CLIÉ handheld. You can use whichever is the most comfortable for you. z Handwriting system There is another way of using the handwriting system besides Graffiti For details, refer to “Entering text on your CLIÉ™...
Using data You can use data from another application to easily create new data in an application. You can use data efficiently by following procedures. Creating new data from the text data of other applications For example, follow the steps below to use data from another application in Address Book.
Page 37
Tap [OK]. Address Book starts and the data you created is displayed. Tips • If you want to create new data in Date Book, tap [New Date Book data] in step 3 and then tap [Time :] and [Date :] in the displayed New Date Book data screen.
Page 38
Select the operation you want for the search results. You can select the following operations. A [V]: B [Detail]: Select the data from the search results, and tap this to C [Add]: D [GoTo]: Select the data from the search results, and tap this to start E [Search]: Enter text in the text field, and tap this to search the data.
Synchronizing data between your CLIÉ handheld and computer by entering a schedule event (the HotSync What is the HotSync ® The HotSync operation is an easy operation that allows you to synchronize data between your CLIÉ handheld and computer, back up the data of your CLIÉ...
Drag an image file in the contents field with the stylus to where you want to put it. The image file is put. A movie file, voice memo, and Free Notes memo can also be put on the screen. For details on how to use Date Book, refer to “CLIE Organizer-Date Book” in the “CLIÉ...
Page 41
CLIE Organizer for PC starts and the Date Book window is displayed. You can also click [Start], select [Programs] ([All Programs] for Windows XP)- [Sony Handheld], and click [CLIE Organizer for PC] to start the software. Click the day you entered the schedule event in the calendar.
Page 42
To display other application windows (Address Book, To Do List, Memo Pad, Free Notes, and Reference) Click any icon on the left side of the window. Performing the HotSync wireless LAN function You can also synchronize data between your CLIÉ handheld and computer using the wireless LAN function.
Taking pictures using the built-in camera You can take pictures and view image files using your CLIÉ handheld as a digital still camera. For details on CLIE Camera, refer to “Still images” in the “CLIÉ Application Manual” (HTML format). Taking pictures Slide the Lens Cover Lever down, as shown in the illustration.
Slide the Lens Cover Lever up. The lens cover is closed. Notes • By taking pictures, hold your CLIÉ handheld firmly with both hands and press the CAPTURE button slowly. • After the CAPTURE button is pressed when the viewfinder blacks out, your CLIÉ...
Recording/Playing back a voice memo (Voice Recorder) You can record sounds using the built-in microphone of your CLIÉ handheld. You can also use the voice memo as an alarm sound or attach it to an e-mail. For details, refer to “Voice Recorder” in the “CLIÉ Application Manual” (HTML format).
Playing back a voice memo You can play back a voice memo using Voice Recorder, [Viewer] of CLIE Organizer, or CLIE Viewer. For details on each application, refer to each application in the “CLIÉ Application Manual” (HTML format).
Gently press the RESET button with the stylus. The system shuts down and your CLIÉ handheld restarts. After restarting, it displays “palm POWERED”, “SONY” and “CLIÉ”, followed by the Preferences screen for setting up the time and date. Notes •...
Performing a hard reset If a soft reset does not solve the problem, you may need to perform a hard reset to restart your CLIÉ handheld. Notes • All records and add-on applications stored on your CLIÉ handheld will be erased by performing a hard reset. •...
Page 49
The hard reset is performed. After restarting, your CLIÉ handheld displays “palm POWERED”, “SONY” and “CLIÉ”, followed by the SETUP screen. Refer to “Step 2: Performing the initial setup after turning on your CLIÉ handheld for the first time” on page 9 for the initial setup.
Supplied applications The following applications are supplied with your CLIÉ handheld. For details, refer to the “CLIÉ Application Manual” (HTML format). Types of applications There are two types of applications: • Applications already installed on your CLIÉ handheld • Applications you need to install on your computer For details on how to install applications, refer to “Installing the supplied applications on your CLIÉ™...
Other applications Applications that are run on your CLIÉ handheld. To start the following applications, tap the application icon in the Applications screen, which can be displayed by tapping [Applica…] in CLIE Organizer. Address Book You can manage addresses and telephone numbers. Applications You can display the CLIE Launcher.
CLIE Mail You can browse, send, and receive e-mail messages with your CLIÉ handheld. Notes • You must be connected to the Internet beforehand to send and receive e-mail messages. • When you want to send an e-mail message from your computer to your CLIÉ handheld, you need to install CLIE Mail Conduit on your computer from “CLIÉ...
HotSync You can synchronize data between your CLIÉ handheld and computer. You can also save backup data on your computer. Macromedia Flash Player 5 You can play the Macromedia Flash files. Prepare a “Memory Stick” media. Memo Pad You can take text format memos. Memory Stick Backup You can make a backup of an application or data on your CLIÉ...
NetFront v3.1 for CLIE You can browse website. Note You must be connected to the Internet beforehand. Picsel Viewer for CLIE ® You can view documents created in Microsoft Word/Excel/PowerPoint or PDF files on your CLIÉ handheld. Prepare a “Memory Stick” media. Preferences You can customize various settings for your CLIÉ...
To use the following software, install it on your computer from the supplied Installation CD-ROM beforehand. CLIE Update Wizard You can update the contents of your CLIÉ handheld from Sony CLIÉ handheld support page via the Internet. Install CLIE Update Wizard on your computer from “CLIÉ Utilities” of the Installation CD-ROM Menu, and make sure you connect your CLIÉ...
Intellisync Lite You can synchronize data of Date Book, Address Book, To Do List, etc., on your CLIÉ handheld with Microsoft Outlook or Lotus Organizer on your computer. Install Intellisync Lite on your computer from “CLIÉ Utilities” of the Installation CD-ROM Menu, and make sure you connect your CLIÉ...
Using CLIÉ Manuals with your computer You can also use the other manuals of your CLIÉ handheld that are stored on the supplied Installation CD-ROM. The manuals are to be read on your computer. Note Prior to using the manuals, refer to “Step 1: Installing Palm™ Desktop for CLIÉ on your computer”...
How to perform basic operations and to use advanced features of your CLIÉ handheld How to solve problems you may have If you have any problems while using your CLIÉ handheld, refer to “Frequently Asked Questions” on page 65 first. If the problem persists, read “Troubleshooting Q&A”...
Windows desktop. The CLIÉ Application Guide PEG-TH55 window is displayed. You can also click [Start], select [Programs] ([All Programs] for Windows XP)- [Sony Handheld]-[About PEG-TH55], and click [CLIÉ Manuals] to start CLIÉ Manuals. Click the manual you want to read.
Page 60
Opening CLIÉ Manuals from the supplied Installation CD-ROM Insert the supplied Installation CD-ROM into the CD-ROM drive of your computer. The Installation CD-ROM window is displayed. Click [Finish] at the bottom left of the Installation CD-ROM window. Double-click For Windows XP, click [Start] at the bottom left of the Windows desktop, then click [My Computer] on the displayed screen.
Reading the PDF manuals on your computer The following explains how to read the PDF format manuals on your computer. A Use the Hand Tool to scroll the displayed page. B Bookmarks are displayed. Click each title to display the page. Click to display the directories of the chapters.
Click [Install] to install Adobe Reader. Follow the on-screen instructions. Click [Finish]. The Installation CD-ROM window closes. Reading the HTML manual on your computer (CLIÉ Application Manual) The following explains how to read the HTML format manual on your computer. Note You need Microsoft Internet Explorer version 5.0 or later to display “CLIÉ...
Note Thousands of third party add-on applications are available for the Palm OS platform. Sony does not support third party applications. If you are having problems with a third party application, please contact the publisher of that application. (CLIÉ Info) on the Windows desktop, and select...
Making a backup of the data or applications on your CLIÉ handheld Sony recommends that you make a backup of your data in case of unexpected problems. Backing up your data will ensure that it can be restored again on your CLIÉ...
Frequently Asked Questions If the solutions mentioned in this section do not solve your problem, refer to the “Troubleshooting Q&A” (PDF format). My CLIÉ handheld does not work properly (page 67) • I cannot turn on my CLIÉ handheld • The screen is not displayed even though the POWER LED is on •...
Page 66
• Palm™ Desktop for CLIÉ does not start or cannot be selected from the menu • CLIE Organizer for PC does not start or cannot be selected from the menu • HotSync Manager does not start. task tray (Notification area) at the bottom right of my computer window I cannot play music (page 75) •...
My CLIÉ handheld does not work properly I cannot turn on my CLIÉ handheld B Is the POWER/HOLD switch of your CLIÉ handheld in HOLD mode (page 88) ? Your CLIÉ handheld does not work when the POWER/HOLD switch is in HOLD mode.
My CLIÉ handheld keeps turning itself off B Your CLIÉ handheld is designed to turn itself off after a period of inactivity (Automatic power-off). You can set the automatic power-off time by selecting time for [Auto-off After:] in [General] of the Preferences screen. Note The maximum idle time is 3 minutes.
Applications do not operate properly after a soft reset is performed B If you encounter application problems (such as improper operations, unusual display, or freezing during a soft reset) after you performed a reset, the reset may not be completed properly. In such a case, perform a soft reset once again (page 47). If you still cannot solve your problem, try a hard reset (page 48).
I cannot enter text properly My CLIÉ handheld does not recognize handwritten characters (when using Graffiti B To have your CLIÉ handheld recognize handwritten characters entered with the stylus, ® you must use Graffiti For details, refer to “Entering text on your CLIÉ™ handheld: Using Graffiti enter text”...
Page 71
(HotSync) displayed in the task tray (Notification area) at the bottom right of your computer window? If not, click [Start], select [Programs] ([All Programs] for Windows XP)-[Sony Handheld], and click [HotSync Manager] to start HotSync Manager. B Is [Local USB] in the menu selected? (You can display this by clicking in the task tray (Notification area).)
Page 72
B Is the USB port active? Check whether the USB port works normally by connecting another USB device, such as a USB mouse. B If you use an extended terminal devices for laptop computers, such as a port replicator, you may not be able to use either the port replicator or the USB port of your computer. B Quit all applications other than CLIE Organizer for PC (or Palm™...
Page 73
B Is the application set not to synchronize files? Click (HotSync) in the task tray (Notification area) at the bottom right of your computer window and select [Custom...] from the menu. Check that the application is set to synchronize files. B Is third party backup or synchronization software installed on your computer or CLIÉ...
Page 74
CLIE Organizer for PC does not start or cannot be selected from the menu B Is CLIE Organizer for PC properly installed on your computer? The hardware or software of your computer may not be compatible with CLIE Organizer for PC. Uninstall CLIE Organizer for PC and reinstall it. B Is Palm™...
Do not use a USB hub If you connect your CLIÉ handheld to your computer via a USB hub, you may not be able ® to perform the HotSync operation properly. Make sure you connect the USB cable directly to a USB port of your computer. Some computers have the hub function built into their internal circuitry.
■ For customer support information Double-click Handheld Support]. ■ For online customer registration (For customers in the U.S.A. , Canada, and Europe only) Double-click CLIÉ™ Registration]. (CLIÉ Info) on the Windows desktop, and select [CLIÉ™ (CLIÉ Info) on the Windows desktop, and select [Sony...
Notes on use Handling your CLIÉ handheld • Make sure you do not scratch or damage your CLIÉ handheld’s screen. Always use the supplied stylus to tap on the screen. Do not use a writing pen, pencil, or other sharp object on the screen. •...
Battery considerations Battery safety To avoid battery leakage, heat generation, firing, or bust, observe the following: • Do not use any other type of battery in your CLIÉ handheld. • Do not charge the battery in any other way than as specified in this manual. •...
Your CLIÉ handheld may get warm if turned on for long periods of time. This is not a malfunction. About replacing the battery CAUTION Please contact with your nearest Sony dealer in connection with this product with problem. ® operation.
Approx. 4 hours (when viewing movie files with the backlight on*) Recording voice memos (in continuous mode): Approx. 19.5 hours (when recording voice memos in HOLD mode) Approx. 6 hours (when recording voice memos not in HOLD mode and the backlight on*) Performing data communication (for models containing the Bluetooth...
Your CLIÉ handheld supports “Memory Stick” media, “MagicGate Memory Stick” media, “Memory Stick Duo” media, “Memory Stick PRO” media, and “Memory Stick PRO Duo” media. Note that data requiring the MagicGate function cannot be viewed or recorded with “Memory Stick PRO”...
System requirements The following are the system specifications required to run Palm™ Desktop for CLIÉ and software supplied on the Installation CD-ROM: • OS: Windows Millennium Edition, Windows 2000 Professional, Windows XP Home Edition, Windows XP Professional • CPU: Pentium II 400MHz or faster (Pentium III 500MHz or faster is recommended) •...
CLIÉ™ handheld components This chapter explains each part of your CLIÉ handheld, the supplied accessories, and additional information. Front panel Continued on next page • • • • • • • • • • • • • • • • • • • •...
A Headphone Jack For headphones/earphones with a φ3.5 stereo mini jack (commercially available). B CAPTURE Button (Page 43) Press the CAPTURE button to take pictures. C Lens Cover Lever (Page 43) Slide to open/close the lens-cover and start CLIE Camera. D “Memory Stick”...
Back panel A Jog Dial™ navigator (Page 31) Use to select and run applications or items. Depending on the application, unique features are assigned. B Left/Right Buttons Moves the selection area of an item or an operation. Depending on the application, unique features such as displaying the previous or next screen are assigned.
Page 88
POWER/HOLD switch z Turning on/off your CLIÉ handheld Slide down the POWER/HOLD switch The POWER/HOLD switch will return to the center position after being released. Your CLIÉ handheld powers on, the last screen viewed is displayed, and the POWER LED lights green. To turn off your CLIÉ handheld, slide down the POWER/HOLD switch again and then release.
Using “Memory Stick” media z Inserting “Memory Stick” media Pull out the “Memory Stick” slot cover. Insert a “Memory Stick” media. Note Insert a “Memory Stick” media in the right direction. If you forcibly insert a “Memory Stick” media in the wrong direction, the “Memory Stick” slot may be damaged. Open the “Memory Stick”...
Page 90
z Removing “Memory Stick” media Push “Memory Stick” media in Note Make sure that your CLIÉ handheld is not writing data/files to, or reading data/files from a “Memory Stick” media before removing it. (The “Memory Stick” LED blinks when it is reading or writing data/files.) If you remove a “Memory Stick”...
Page 91
Locating the components of the Home screen (CLIE Organizer) If a different screen is displayed, tap A Silk Screen Area (Page 92) B Status bar (Page 92) C Home icon Tap to display the Home screen. D Menu icon Tap to display menu of the current application.
Status bar The status bar displays the following icons. Additional icons will be displayed according to the applications in use. Tap to display the Home screen. Tap to display the menus of the current application. Tap to display the Find dialog box. Tap to display the Silk Plug-In screen.
Page 93
Each icon indicates the information on the “Memory Stick” media inserted into your CLIÉ handheld. “Memory Stick” media is inserted. “Memory Stick” media is not inserted. “Memory Stick” media is write-protected. “Memory Stick” media is not read correctly. A “Memory Stick” compatible device is inserted. Tap the icon to display the Media Info dialog box when “Memory Stick”...
Page 94
is displayed when the Bluetooth ® Bluetooth wireless technology only) Tap to display the Adjust Volume dialog box. Displays the current time. To change the display format, select Preferences, tap [Formats], and select a format for [Time:]. For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting up the Date &...
Page 95
Icons for switching Graffiti keyboard (When standard plug-in is selected) ® 2/Software You can switch between the Graffiti software keyboard by tapping this icon. Operating the software keyboard is the same as the on-screen keyboard, however applicaions can be used without minimizing the current screen.
Protective Cover You can remove the protective cover as follows. Removing the protective cover Push in the direction 1 with your left hand. Remove the right side of the protective cover from the hinge of your CLIÉ handheld by pulling it in the direction Remove the protective cover completely from your CLIÉ...
Page 97
After attaching the protective cover, open and close it to check. Notes • Do not open the protective cover too far or damage will occur. • Do not carry your CLIÉ handheld by the protective cover only or damage will occur.
Page 98
INDEX AC power adapter ... . . 6 Address Book ....51 Applications ....51 .
Page 99
Palm™ Desktop for CLIÉ ..17 Picsel Viewer for CLIE ... . 54 Preferences ....54 Protective Cover .
Page 103
Before using your CLIÉ handheld, make sure you read the accompanying End-User’s License Agreement. • Sony, CLIÉ, “Memory Stick”, “Memory Stick Duo”, “Memory Stick PRO”, “Memory Stick PRO Duo”, “MagicGate Memory Stick”, Jog Dial, and their logos are trademarks of Sony Corporation.
Page 104
For the latest information on support, CLIÉ products and accessories, check our official Sony CLIÉ website For customers in the U.S.A. and Canada http : //www.sony.com/clie/ For customers in Australia, Hong Kong, Malaysia, Mexico, New Zealand, Singapore, Taiwan, Thailand, and U.A.E.
Need help?
Do you have a question about the PEG-TH55 CLIE Handbook (primary manual) and is the answer not in the manual?
Questions and answers