Table of Contents
Advertisement
6.8.3 4.8.8 Refuelling:
• BXT4224 models have the fuel tank located in the front
frame and is accessed by lifting the tool box lid.
• BXT6238 models have the fuel tank located in the front
frame and is accessed by lifting the rubber flap over the
cap. Do not overfill.
Fill the tank to 1/2" (12 mm) below bottom of filler neck to
provide space for any fuel expansion. Do not overfill.
WARNING!
Fuel vapors can explode causing
injury or death. Do not smoke while
refueling. Keep sparks, fl ames, and hot
components away.
6.8.4 Safety Curtains
Each feed hopper is designed with an internal rubber/belting
curtain to prevent chips and debris from coming out of the
hopper when working. Check the condition of the curtain each
day prior to starting. Replace the curtain if torn, damaged or
missing to minimize the chance of material coming out of the
feed hopper.
6.8.5 Operating Hints:
• Keep the working area clean and free of debris to prevent
slipping or tripping. Operate only on level ground.
• Do not place hands or any body parts into the feed hopper
during operation. Use a stick or branch to push material
into the rotor when it goes past the curtain in the feed
hopper.
• Do not point discharge at people, animals or buildings.
Rotor can expel wood chips fast enough to cause injury.
• Use care when feeding material into the chipper. Do not
send metal, bottles, cans, rocks, glass or other foreign
material into the wood chipper. If foreign material enters
chipper, stop machine, turn engine off and place ignition
key in your pocket and wait for all moving parts to stop
before removing material and/or unplugging. Inspect
machine for damaged or loose parts before resuming work.
BXT Series
BXT6238
W027
BXT4224
29
Fig. 18 – FUEL TANK
Fig. 19 – CURTAIN
Advertisement
Table of Contents
