Epson OT-CU40 Manual page 9

13. Plug the power cable into a power outlet and then turn on the
printer.
If an error appears on the screen after turning on the power, start over from step 1.
14. Select the following menu on the operation panel to reset the
counter of the auto cutter.
[Menu] - [Printer Status/Print] - [Auto Cut Counter] - [After
Replacement]
15. Check that the auto cutter unit operates properly.
We recommend that you check the operation in advance. Load the paper in the printer
and use the auto cut button to check.
If an error appears on the screen after the operation, start over from step 1.
1
English
ON
2
OT-CU40 User's Manual 9