Hasselblad X1D-50c User Manual page 143

Troubleshooting
Problem
Camera is deactivated
Wrong language
Dark or coloured spots or lines in your
images
Temperature warning icon appears
X1D
Possible cause
The camera can be affected by a
discharge of electricity. This can happen
when the area around the control buttons
on the grip accidentally touches a
conductive cord or material connected to
earth.
This can deactivate the camera and does
not cause any damage.
If the Camera has been set to a language
you don't understand, you can navigate
to your preferred language by following
the actions and appearance in the
illustrations in the suggested section.
Dirt or particles on the surface of the
sensor infrared (IR) filter.
Rapidly taken captures make heavy
demands on the processor in the Camera
which in turn produces heat. This
can in combination with high ambient
temperature result in noise in the image
files.
At around 60 °C a warning dialogue
appears notifying that the sensor is
temporarily shutting down to allow the
Camera to cool.
Table of Content
USER GUIDE
Suggested correction
Remove and re-insert the battery, then
press the ON - OFF button on the camera
to turn on the camera.
See page 145 how to change language
on the camera from an unknown
language.
See "6.4 Clean the Sensor Filter" on
page 147.
Let the Camera cool down for at least 20
minutes.
www.hasselblad.com
143